Experimental Investigation of Using Sandwich Panels as Infill Plate in a Steel Plate Shear Wall

被引:2
|
作者
Dusak, Said [1 ]
Yalcin, Cem [2 ]
Yelgin, Ahmet Necati [3 ]
机构
[1] Sakarya Univ, Inst Nat Sci, Sakarya, Turkey
[2] Bogazici Univ, Dept Civil Engn, Istanbul, Turkey
[3] Sakarya Univ, Dept Civil Engn, Sakarya, Turkey
来源
TEKNIK DERGI | 2020年 / 31卷 / 06期
关键词
Steel plate shear wall; infill steel frame; sandwich panel; composite panel shear wall; cyclic loading; energy dissipation; LIGHT-GAUGE;
D O I
10.18400/tekderg.559036
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A total of five steel frame specimens, one bare and four infilled, were designed with thin-walled steel sheets and corrugated sandwich infill panels in order to increase their load and energy dissipation capacity. For this experimental study, single-story, single-bay steel frames of nominally-pinned beam-to-column connections were prepared with a scale ratio of 1:3. A quasi-static cyclic loading pattern was applied to the control bare and infilled steel frames, and their behavior was investigated both experimentally and analytically using SAP2000 and ABAQUS finite element software. First, five identical bare steel frame specimens were prepared and one of them was tested as a control specimen, and its rigidity and cyclic behavior was determined experimentally. Then, two sandwich panel specimens were prepared by connecting sandwich panels in the second and third bare steel frames using appropriate connections. The fourth specimen had only a single steel plate infill. Finally, the fifth specimen was prepared by removing the polyurethane material from inside the sandwich panel and only steel plates were attached to both faces of the frame. This way, it was possible to compare the effect of the polyurethane material inside the sandwich panel and the corrugated steel plate on the overall system behavior. In all specimens, the infill plates were fastened to the frame connection profiles using self-drilling screws and the responses of the specimens were compared in terms of their maximum load capacity, initial stiffness, ductility and energy dissipation capacity values under cyclic loading. The experimental and analytical investigations showed that, similarly to steel plate infills, the specimens with sandwich panels also behaved in a ductile manner with relatively lower load and energy dissipation capacities. Results of the strip model and the finite element model analyses were then compared with the experimental results and they were both found to be in good agreement.
引用
收藏
页码:10413 / 10439
页数:27
相关论文
共 50 条
  • [21] Investigation of the Behavior of Steel Plate Shear Walls Considering Double Corrugated Low-Yield-Point Steel Infill Plate
    Hosseinzadeh, Leila
    Kontoni, Denise-Penelope N.
    Babaei, Behnam
    INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 2023, 21 (10) : 1631 - 1642
  • [22] Investigation of the Behavior of Steel Plate Shear Walls Considering Double Corrugated Low-Yield-Point Steel Infill Plate
    Leila Hosseinzadeh
    Denise-Penelope N. Kontoni
    Behnam Babaei
    International Journal of Civil Engineering, 2023, 21 : 1631 - 1642
  • [23] Structural shear performance of insulated precast concrete sandwich panels with steel plate connectors
    Kinnane, Oliver
    West, Roger
    Hegarty, Richard O.
    ENGINEERING STRUCTURES, 2020, 215
  • [24] Investigation of the effect of trapezoidal infill plate angle on the behavior of the corrugated steel shear walls - An experimental and numerical study
    Hosseinzadeh, Leila
    Ghamari, Ali
    STEEL CONSTRUCTION-DESIGN AND RESEARCH, 2024, 17 (01): : 43 - 52
  • [25] Hysteretic behavior and optimization of infill panels in corrugated plate shear walls
    Dou C.
    Xie C.
    Yang N.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2023, 44 (05): : 170 - 182
  • [26] A Study on Steel Plate Shear Wall
    Annapoorna, B. P.
    Boodihal, Mohammed Ali
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2018), 2019, 577
  • [27] Experimental study of steel plate shear walls with infill plates strengthened by GFRP laminates
    Nateghi-Alahi, F.
    Khazaei-Poul, M.
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2012, 78 : 159 - 172
  • [28] The Gusset Plate Effect in Steel Plate Shear Wall Systems
    Alinia, M. M.
    Jamshidi, A. H.
    Habashi, H. R.
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2012, 19 (04) : 271 - 276
  • [29] Characteristics of the wall-frame interaction in steel plate shear walls with perforated infill plates
    Darvishi, H.
    Mofid, M.
    SCIENTIA IRANICA, 2021, 28 (06) : 3092 - 3111
  • [30] Characteristics of the wall-frame interaction in steel plate shear walls with perforated infill plates
    Darvishi, Hadi
    Mofid, Masoud
    Scientia Iranica, 2021, 28 (6 A) : 3092 - 3111