Effect of Surface-Modified Ammonium Polyphosphate with KH550 and Silicon Resin on the Flame Retardancy, Water Resistance, Mechanical and Thermal Properties of Intumescent Flame Retardant Polypropylene

被引:75
|
作者
Liu, Jian-Chao [1 ]
Xu, Miao-Jun [1 ]
Lai, Tao [1 ]
Li, Bin [1 ]
机构
[1] Northeast Forestry Univ, Heilongjiang Key Lab Mol Design & Preparat Flame, Coll Sci, Harbin 150040, Heilongjiang, Peoples R China
基金
中国博士后科学基金;
关键词
FIRE-RETARDANCY; COMPOSITES; SYSTEM; AGENT; POLYETHYLENE; WETTABILITY; DEGRADATION; PERFORMANCE; COPOLYMER; POLYMERS;
D O I
10.1021/acs.iecr.5b01670
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Ammonium polyphosphate (APP), which is an important component of intumescent flame retardant (IFR), has been modified with (3-aminopropyl) triethoxysilane (KH550) and silicon resin to enhance its hydrophobic properties. The structure and properties of the modified ammonium polyphosphate (MAPP) were well-characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), and water contact angle (CA). The water CA of MAPP was as high as 148 degrees, which demonstrated that MAPP possessed excellent hydrophobic properties. MAPP and APP were mixed with triazine, which is a char-foaming agent (CFA), and polypropylene (PP) to prepare PP/MAPP/CFA and PP/APP/CFA composites, respectively. The fire retardancy and thermal degradation behavior of PP/MAPP/CFA and PP/APP/CFA composites were investigated by limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimetry, and thermogravimetric analysis. The surface and fracture morphologies were evaluated by SEM. The mechanical properties was analyzed by tensile, flexural, and izod impact tests. The results demonstrated that the MAPP imparted excellent flame retardancy of PP/MAPP/CFA systems, along with a higher LOI value, UL-94 rating, and lower heat release rate and total heat released values. The modification enhanced the interfacial adhesion, mechanical stability, and thermal stability of PP/MAPP/CFA composites. Moreover, PP/MAPP/CFA composites with the thickness of 1.6 mm can still pass the UL-94 V-0 rating after treatment with water for 168 h at 70 degrees C, meanwhile the weight loss rate was decreased from 2.31% for PP/APP/CFA composites to 0.85%, indicating excellent water resistance. This investigation shows a promising formulation for water-resistant intumescent flame-retardant PP composites with extraordinary properties.
引用
收藏
页码:9733 / 9741
页数:9
相关论文
共 50 条
  • [31] Preparation and characterization of surface-modified ammonium polyphosphate and its effect on the flame retardancy of rigid polyurethane foam
    Chen, Yajun
    Li, Linshan
    Wang, Wei
    Qian, Lijun
    JOURNAL OF APPLIED POLYMER SCIENCE, 2017, 134 (40)
  • [32] Effect of the surface modification of ammonium polyphosphate on the structure and property of melamine–formaldehyde resin microencapsulated ammonium polyphosphate and polypropylene flame retardant composites
    Huai-wen Yan
    Jia-li Wei
    Bo Yin
    Ming-bo Yang
    Polymer Bulletin, 2015, 72 : 2725 - 2737
  • [33] An efficient method to improve simultaneously the water resistance, flame retardancy and mechanical properties of POE intumescent flame-retardant systems
    Li, Rui-Min
    Deng, Cong
    Deng, Cheng-Liang
    Dong, Liang-Ping
    Di, Hong-Wei
    Wang, Yu-Zhong
    RSC ADVANCES, 2015, 5 (21) : 16328 - 16339
  • [34] Enhanced Flame Retardancy and Mechanical Properties of Intumescent Flame-Retardant Polypropylene with Triazine Derivative-Modified Nano-SiO2
    Weihao Quanyong Wang
    Lei Li
    Jialiang Zhang
    Wenjie Zhang
    Yuchao Xiong
    Bin Wu
    Yuliang Song
    Polymer Science, Series B, 2020, 62 : 306 - 318
  • [35] Intumescent flame retardant of polypropylene system with enhanced thermal properties and flame retardancy based on α-zirconium phosphate composite particles
    Lingfeng Xu
    Caihong Lei
    Ruijie Xu
    Xiaoqing Zhang
    Jinbao Xu
    Polymer Bulletin, 2018, 75 : 2707 - 2727
  • [36] Intumescent flame retardant of polypropylene system with enhanced thermal properties and flame retardancy based on α-zirconium phosphate composite particles
    Xu, Lingfeng
    Lei, Caihong
    Xu, Ruijie
    Zhang, Xiaoqing
    Xu, Jinbao
    POLYMER BULLETIN, 2018, 75 (06) : 2707 - 2727
  • [37] Enhanced Flame Retardancy and Mechanical Properties of Intumescent Flame-Retardant Polypropylene with Triazine Derivative-Modified Nano-SiO2
    Wang, Quanyong
    Li, Weihao
    Zhang, Lei
    Zhang, Jialiang
    Xiong, Wenjie
    Wu, Yuchao
    Song, Bin
    Mai, Yuliang
    POLYMER SCIENCE SERIES B, 2020, 62 (03) : 306 - 318
  • [38] Effect of Cellulose Acetate Butyrate Microencapsulated Ammonium Polyphosphate on the Flame Retardancy, Mechanical, Electrical, and Thermal Properties of Intumescent Flame-Retardant Ethylene-Vinyl Acetate Copolymer/Microencapsulated Ammonium Polyphosphate/Polyamide-6 Blends
    Wang, Bibo
    Tang, Qinbo
    Hong, Ningning
    Song, Lei
    Wang, Lei
    Shi, Yongqian
    Hu, Yuan
    ACS APPLIED MATERIALS & INTERFACES, 2011, 3 (09) : 3754 - 3761
  • [39] Flame Retardancy, Thermal and Mechanical Properties of Novel Intumescent Flame Retardant/MXene/Poly(Vinyl Alcohol) Nanocomposites
    Yan, Xiaofei
    Fang, Jie
    Gu, Jianjun
    Zhu, Chenkai
    Qi, Dongming
    NANOMATERIALS, 2022, 12 (03)
  • [40] Joint-aggregation intumescent flame-retardant effect of ammonium polyphosphate and charring agent in polypropylene
    Tang, Wei
    Qian, Lijun
    Chen, Yajun
    Qiu, Yong
    Xu, Bo
    Li, Juan
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2020, 31 (08) : 1699 - 1708