An Analysis of Joint Assembly Geometric Errors Affecting End-Effector for Six-Axis Robots

被引：4

作者：

Raksiri, Chana ^{[1
]}

Pa-im, Krittiya ^{[2
]}

Rodkwan, Supasit ^{[2
]}

机构：

[1] Kasetsart Univ, Dept Ind Engn, Bangkok 10900, Thailand

[2] Kasetsart Univ, Dept Mech Engn, Bangkok 10900, Thailand

来源：

ROBOTICS | 2020年 / 9卷 / 02期

关键词：

geometric error; GD&T-induced error; error compensation; industrial six-joint robot; COMPENSATION; CALIBRATION; IDENTIFICATION; MANIPULATORS; TOOLS;

D O I：

10.3390/robotics9020027

中图分类号：

TP24 [机器人技术];

学科分类号：

080202 ; 1405 ;

摘要：

This paper presents an analysis of the geometric errors of joint assembly that affect the end-effector for a six-axis industrial robot. The errors were composed of 30 parameters that come from the Geometric Dimensioning and Tolerancing (GD&T) design, which is not the normal way to describe them. Three types of manufacturing tolerancing-perpendicularity, parallelism and position-were introduced and investigated. These errors were measured by the laser tracker. The measurement data were calculated with an analysis of the circle fitting method. The kinematic model and error model based on a combination of translations methods were used. The experiment was carried out in order to calculate the tolerancing of geometric error. Then, the positions of the end-effector in the actual measurement from laser tracker and exact performance were compared. The discrepancy was compensated by offline programming. As a result, the position errors were reduced by 90%.

引用

页数：13

共 22 条

[1] Estimation of Individual Force at Three Contact Points on an End-effector by a Six-axis Force/Torque Sensor
Kutsuzawa, Kyo
Sakaino, Sho
Tsuji, Toshiaki
PROCEEDINGS OF THE IECON 2016 - 42ND ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2016, : 6409 - 6414
[2] O(n) Algorithm for Elastic Link/Joint Robots with End-Effector Contact
Gattringer, Hubert
Mueller, Andreas
Pucher, Florian
Reiter, Alexander
IUTAM SYMPOSIUM ON INTELLIGENT MULTIBODY SYSTEMS - DYNAMICS, CONTROL, SIMULATION, 2019, 33 : 115 - 132
[3] Research on workspace singularity analysis methods for six-axis serial robots
Kuang, Tianyou
Yang, Fan
Yan, Wei
Qi, Bo
Proceedings of SPIE - The International Society for Optical Engineering, 2024, 13291
[4] Inverse Kinematic of Six-Axis Robots Based on R*(3, 0, 1) Geometric Algebra
Du J.
Wu H.
Yang X.
Chen B.
Cheng S.
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2018, 46 (09): : 30 - 35
[5] A step identification method of joint parameters of robots based on the measured pose of end-effector
Fang, Lijin
Dang, Pengfei
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2015, 229 (17) : 3218 - 3233
[6] Geometric Description and Analysis Method for Motion Characteristics of Robot End-effector
Ye M.
Shi Z.
Luo Y.
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (03): : 388 - 395
[7] Analysis of Flexible End-Effector for Geometric Conformity in Reconfigurable Assembly Systems Testing geometric structure of grasping mechanism for object adaptibility
Basson, C. I.
Bright, G.
Walker, A. J.
2017 PATTERN RECOGNITION ASSOCIATION OF SOUTH AFRICA AND ROBOTICS AND MECHATRONICS (PRASA-ROBMECH), 2017, : 92 - 97
[8] Mapping Rules between Geometric Errors in Six-axis Stages and Alignment Accuracy of Fiber Array
Tang H.
Tang G.
Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2019, 30 (14): : 1720 - 1726
[9] An uncertainty analysis method for error reduction in end-effector of spatial robots with joint clearances and link dimension deviations
Hafezipour, M.
Khodaygan, S.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 2017, 30 (06) : 653 - 663
[10] Fatigue Analysis of Wrist Joint Part of Six-Axis Articulated Robot
Wang, T. M.
Chen, C. H.
PROCEEDINGS OF THE FOURTEENTH INTERNATIONAL FEDERATION FOR THE PROMOTION OF MECHANISM AND MACHINE SCIENCE WORLD CONGRESS, 2015, : 367 - 370

← 1 2 3 →