Spatially varying microhardness in a platinum-modified nickel aluminide bond coat in a thermal barrier coating system

被引：9
|
作者：
Zhang, M [1 ]
Heuer, AH [1 ]
机构：
[1] Case Western Reserve Univ, Dept Mat Sci & Engn, Cleveland, OH 44106 USA
来源：
SCRIPTA MATERIALIA | 2006年 / 54卷 / 07期
关键词：
coatings; TEM; PVD; microindentation; nickel base alloy bond coats;
D O I：
10.1016/j.scriptamat.2005.12.034
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The hardness of a Pt-modified Ni aluminide bond coat and its ZrO2 top coat in an electron beam-physical vapor deposition ZrO2-based thermal barrier coating system has been studied as a function of temperature in as-deposited and aged (1200 degrees C/1 h) coupon samples, and in a used blade taken out of service after a (modest) fraction of life. A marked brittle to ductile transition at 580 +/- 30 degrees C was observed in the as-deposited material, in agreement with previous uniaxial tensile data in this system. Significant spatial variation in the hardness of the bond coats were observed at room temperature and could be correlated with spatially varying microstructures. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1265 / 1269
页数：5
相关论文
共 50 条
  • [21] PROTECTING GAS TURBINE COMPONENTS: THE RELATIVE DURABILITY OF A CONVENTIONAL AND A PLATINUM-MODIFIED ALUMINIDE COATING.
    Cocking, Janis L.
    Johnston, Graham R.
    Richards, Peter G.
    Materials and Design, 1985, 6 (05): : 224 - 229
  • [22] The effect of bond coat oxidation on the microstructure and endurance of a thermal barrier coating system
    Taylor, M. P.
    Jackson, R. D.
    Evans, H. E.
    MATERIALS AT HIGH TEMPERATURES, 2009, 26 (03) : 317 - 323
  • [23] Evolution of a diffusion aluminide bond coat for thermal barrier coatings during thermal cycling
    Pan, D
    Chen, MW
    Wright, PK
    Hemker, KJ
    ACTA MATERIALIA, 2003, 51 (08) : 2205 - 2217
  • [24] Thermal shock behavior of platinum aluminide bond coat/electron beam-physical vapor deposited thermal barrier coatings
    Xu, Zhenhua
    Dai, Jianwei
    Niu, Jing
    Li, Na
    Huang, Guanghong
    He, Limin
    Journal of Alloys and Compounds, 2014, 617 : 185 - 191
  • [25] Thermal shock behavior of platinum aluminide bond coat/electron beam-physical vapor deposited thermal barrier coatings
    Xu, Zhenhua
    Dai, Jianwei
    Niu, Jing
    Li, Na
    Huang, Guanghong
    He, Limin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 617 : 185 - 191
  • [26] Nanocrystalline MCrAlY bond coat for thermal barrier coating applications
    Ajdelsztajn, L
    He, JH
    Kim, GE
    Provenzano, V
    Lavernia, EJ
    Schoenung, JM
    SURFACE ENGINEERING: IN MATERIALS SCIENCE II, 2003, : 71 - 80
  • [27] Shear strength of a thermal barrier coating parallel to the bond coat
    Cruse, TA
    Dommarco, RC
    Bastias, PC
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1998, 120 (01): : 26 - 32
  • [28] The influence of bond coat surface roughness and structure on the oxidation of a thermal barrier coating system
    Taylor, MP
    Evans, HE
    HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 5, PTS 1 AND 2, 2001, 369-3 : 711 - 717
  • [29] Glass-ceramics as oxidation resistant bond coat in thermal barrier coating system
    Das, S.
    Datta, S.
    Basu, D.
    Das, G. C.
    CERAMICS INTERNATIONAL, 2009, 35 (04) : 1403 - 1406
  • [30] An investigation on high entropy alloy for bond coat application in thermal barrier coating system
    Jadhav, Mahesh
    Singh, Sheela
    Srivastava, Meenu
    Kumar, G. S. Vinod
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 783 : 662 - 673
12345