Spatially varying microhardness in a platinum-modified nickel aluminide bond coat in a thermal barrier coating system

被引：9
|
作者：
Zhang, M [1 ]
Heuer, AH [1 ]
机构：
[1] Case Western Reserve Univ, Dept Mat Sci & Engn, Cleveland, OH 44106 USA
来源：
SCRIPTA MATERIALIA | 2006年 / 54卷 / 07期
关键词：
coatings; TEM; PVD; microindentation; nickel base alloy bond coats;
D O I：
10.1016/j.scriptamat.2005.12.034
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The hardness of a Pt-modified Ni aluminide bond coat and its ZrO2 top coat in an electron beam-physical vapor deposition ZrO2-based thermal barrier coating system has been studied as a function of temperature in as-deposited and aged (1200 degrees C/1 h) coupon samples, and in a used blade taken out of service after a (modest) fraction of life. A marked brittle to ductile transition at 580 +/- 30 degrees C was observed in the as-deposited material, in agreement with previous uniaxial tensile data in this system. Significant spatial variation in the hardness of the bond coats were observed at room temperature and could be correlated with spatially varying microstructures. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1265 / 1269
页数：5
相关论文
共 50 条
  • [1] Microstructural characterization of a platinum-modified diffusion aluminide bond coat for thermal barrier coatings
    M. W. Chen
    K. J. T. Livi
    K. J. Hemker
    P. K. Wright
    Metallurgical and Materials Transactions A, 2003, 34 : 2289 - 2299
  • [2] Microstructural characterization of a platinum-modified diffusion aluminide bond coat for thermal barrier coatings
    Chen, MW
    Livi, KJT
    Wright, PK
    Hemker, KJ
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (10): : 2289 - 2299
  • [3] On the microstructural development in platinum-modified nickel-aluminide bond coats
    Darzens, S
    Karlsson, AM
    SURFACE & COATINGS TECHNOLOGY, 2004, 177 : 108 - 112
  • [4] Microstructural evolution of platinum modified nickel aluminide bond coat during thermal cycling
    Chen, MW
    Ott, R
    Hufnagel, TC
    Wright, PK
    Hemker, KJ
    SURFACE & COATINGS TECHNOLOGY, 2003, 163 : 25 - 30
  • [5] Determination of fracture toughness of a platinum-modified nickel aluminide coating by micromechanical testing
    Chen, Ying
    Zhang, Xun
    Williams, Craig J.
    Brewster, Gyaneshwara
    Xiao, Ping
    MATERIALIA, 2021, 20
  • [6] Microstructure Evolution of a Platinum-Modified Nickel-Aluminide Coating During Thermal and Thermo-mechanical Fatigue
    Sallot, Pierre
    Maurel, Vincent
    Remy, Luc
    N'Guyen, Franck
    Longuet, Arnaud
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (10): : 4589 - 4600
  • [7] The effect of grit blasting on the oxidation behavior of a platinum-modified nickel-aluminide coating
    V. K. Tolpygo
    D. R. Clarke
    K. S. Murphy
    Metallurgical and Materials Transactions A, 2001, 32 : 1467 - 1478
  • [8] Microstructure Evolution of a Platinum-Modified Nickel-Aluminide Coating During Thermal and Thermo-mechanical Fatigue
    Pierre Sallot
    Vincent Maurel
    Luc Rémy
    Franck N’Guyen
    Arnaud Longuet
    Metallurgical and Materials Transactions A, 2015, 46 : 4589 - 4600
  • [9] The effect of grit blasting on the oxidation behavior of a platinum-modified nickel-aluminide coating
    Tolpygo, VK
    Clarke, DR
    Murphy, KS
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (06): : 1467 - 1478
  • [10] Characterization and modeling of a martensitic transformation in a platinum modified diffusion aluminide bond coat for thermal barrier coatings
    Chen, MW
    Glynn, ML
    Ott, RT
    Hufnagel, TC
    Hemker, KJ
    ACTA MATERIALIA, 2003, 51 (14) : 4279 - 4294
12345