Numerical simulation of the effect of grain fragmentation on the evolution of microstructure quantities

被引:6
|
作者
Bauer, Erich [1 ]
Safikhani, Saeed [1 ]
Li, Linke [1 ]
机构
[1] Graz Univ Technol, Inst Appl Mech, A-8010 Graz, Austria
关键词
Granular materials; Solid hardness; Grain fragmentation; Micropolar continuum; BREAKAGE MECHANICS; HYPOPLASTIC MODEL; PRESSURE; LOCALIZATION; SHEARING; DENSITY; DAMAGE; TESTS; SAND;
D O I
10.1007/s11012-019-00953-0
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this paper the effect of grain fragmentation of a cohesionless granular material on the change of microstructure quantities is investigated using a micropolar continuum model. To this end the change of the grain size distribution is related in a simplified manner to a reduction of the mean grain diameter, which enters the constitutive equation as the internal length. The additional densification of the grain skeleton is modelled by a reduction of the incremental stiffness, which is related to the so-called solid hardness defined in the sense of a continuum description. The reduction of the mean grain diameter and the solid hardness caused by grain fragmentation is described by corresponding evolution equations, which depend on an increasing mean pressure and an increasing deviatoric stress. The focus of the numerical investigations is on the evolution of microstructure quantities like the void ratio, mean grain diameter and couple stresses under monotonic compression. It is shown that for an initially inhomogeneous distribution of the void ratio polar quantities like microrotations and couple stresses can develop even outside of shear bands. With increasing compression the polar quantities can increase, while the range of fluctuation of the void ratio decreases.
引用
收藏
页码:631 / 642
页数:12
相关论文
共 50 条
  • [41] Numerical Simulation of Microstructure Evolution and Transport Properties of Cement-based Materials
    Liu Z.
    Xia X.
    Chen W.
    Zhang Y.
    Liu C.
    Cailiao Daobao/Materials Reports, 2021, 35 (03): : 03076 - 03084
  • [42] Study on Evolution Law of Microstructure of Cladding Layer by Laser Rescanning and Numerical Simulation
    Wang W.
    Sun W.
    Zhang Z.
    Yu J.
    Huang H.
    Wang Y.
    Xiao Q.
    Cailiao Daobao/Materials Reports, 2022, 36 (02):
  • [43] Numerical simulation of microstructure evolution on near eutectic spheroidal graphite cast iron
    Bing Wu
    Di Meng
    Hong-liang Zheng
    Xue-lei Tian
    China Foundry, 2017, 14 : 386 - 391
  • [44] Microstructure anisotropy of nanocrystalline titanium produced by cryomechanical grain fragmentation
    Pohribnaya, Yu. M.
    Moskalenko, V. A.
    Braude, I. S.
    LOW TEMPERATURE PHYSICS, 2018, 44 (05) : 444 - 450
  • [45] Numerical simulation of microstructure of brittle rock using a grain-breakable distinct element grain-based model
    Gao, Fuqiang
    Stead, Doug
    Elmo, Davide
    COMPUTERS AND GEOTECHNICS, 2016, 78 : 203 - 217
  • [46] Effect of Different Initial Structures on the Simulation of Microstructure Evolution During Normal Grain Growth via Phase-Field Modeling
    Jianbao Gao
    Ming Wei
    Lijun Zhang
    Yong Du
    Zuming Liu
    Baiyun Huang
    Metallurgical and Materials Transactions A, 2018, 49 : 6442 - 6456
  • [47] Numerical simulation of meteorological quantities in and above forest canopies
    Ziemann, A
    METEOROLOGISCHE ZEITSCHRIFT, 1998, 7 (03) : 120 - 128
  • [48] Effect of Different Initial Structures on the Simulation of Microstructure Evolution During Normal Grain Growth via Phase-Field Modeling
    Gao, Jianbao
    Wei, Ming
    Zhang, Lijun
    Du, Yong
    Liu, Zuming
    Huang, Baiyun
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (12): : 6442 - 6456
  • [49] Grain boundary evolution of highly nanotwinned alloys: Effect of initial twinned microstructure
    Bahena, Joel A.
    Juarez, Theresa
    Velasco, Leonardo
    Hodge, Andrea M.
    SCRIPTA MATERIALIA, 2021, 190 : 27 - 31
  • [50] Grain Size Effect on Microstructure Evolution and Properties of 304 Austenitic Stainless Steel
    Sun J.
    Zhou H.
    Chen L.
    Wu H.
    Liu W.
    Yao F.
    Xu Y.
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2020, 34 (03): : 231 - 240