Improvement of anode-supported solid oxide fuel cells

被引：38
|
作者：
Wang, Z. R. [1 ]
Qian, J. Q. [1 ]
Wang, S. R. [1 ]
Cao, J. D. [1 ]
Wen, T. L. [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
来源：
SOLID STATE IONICS | 2008年 / 179卷 / 27-32期
关键词：
solid oxide fuel cell (SOFC); anode; tape casting; impedance spectra;
D O I：
10.1016/j.ssi.2008.03.022
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Anode-supported electrolyte composite membranes were prepared by a multilayer tape casting and co-sintering procedure. Nickel/yttria-stabilized zirconia (Ni/YSZ), nickel/scandia-stabilized zirconia (Ni/ScSZ) cermets, ScSZ, and Ce0.9Gd0.1O1.9 (CGO) were used as materials of anode substrate, anode functional layer, electrolyte and interlayer. After tape casting and dryness, the green tapes were co-sintered at 1350, 1400, and 1450 degrees C for 4 h in air. Then the LSCF-CGO composite cathode was deposited on the CGO surface by screen-printing and sintered at 1100 degrees C for 3 h. The performance of the anode-supported planar single SOFC was investigated in detail. In order to measure the AC impedance spectra, the symmetrical anode-supported cell design was used and also prepared by tape casting and co-sintering techniques. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：1593 / 1596
页数：4
相关论文
共 50 条
  • [41] A 0-Dimensional Stationary Model for Anode-Supported Solid Oxide Fuel Cells
    Leonide, A.
    Hansmann, S.
    Ivers-Tiffee, E.
    IONIC AND MIXED CONDUCTING CERAMICS 7, 2010, 28 (11): : 341 - 346
  • [42] Performance Analysis of Anode-Supported Solid Oxide Fuel Cells: A Machine Learning Approach
    Golbabaei, Mohammad Hossein
    Varnoosfaderani, Mohammadreza Saeidi
    Zare, Arsalan
    Salari, Hirad
    Hemmati, Farshid
    Abdoli, Hamid
    Hamawandi, Bejan
    MATERIALS, 2022, 15 (21)
  • [43] Microstructural optimization of anode-supported solid oxide fuel cells by a comprehensive microscale model
    Jeon, DH
    Nam, JH
    Kim, CJ
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2006, 153 (02) : A406 - A417
  • [44] Redox-cycling studies of anode-supported microtubular solid oxide fuel cells
    Monzon, H.
    Laguna-Bercero, M. A.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (08) : 7262 - 7270
  • [45] Research progress of anode-supported micro-tubular solid oxide fuel cells
    Sun, K. (keningsun@yahoo.com.cn), 1600, Materials China (64):
  • [46] Mechanical Properties of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells
    Mohammadi, A.
    Pusz, J.
    Smirnova, A. L.
    Sammes, N. M.
    SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 1409 - 1418
  • [47] Sudden Deterioration in Performance During Discharge of Anode-supported Solid Oxide Fuel Cells
    Matsui, Toshiaki
    Kim, Jin-young
    Kikuchi, Ryuji
    Eguchi, Koichi
    ELECTROCHEMISTRY, 2009, 77 (02) : 123 - 126
  • [48] Effect of the Current Collector on Performance of Anode-Supported Microtubular Solid Oxide Fuel Cells
    Casarin, Michele
    Sglavo, Vincenzo M.
    JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2015, 12 (03):
  • [49] Anode-supported solid oxide fuel cells with multilayer LSC/CGO/LSC cathode
    Solovyev, A. A.
    Kuterbekov, K. A.
    Nurkenov, S. A.
    Nygymanova, A. S.
    Shipilova, A. V.
    Smolyanskiy, E. A.
    Rabotkin, S. V.
    Ionov, I. V.
    FUEL CELLS, 2021, 21 (04) : 408 - 412
  • [50] Experimental evaluation of the operating temperature impact on solid oxide anode-supported fuel cells
    Leone, P.
    Lanzini, A.
    Squillari, P.
    Asinari, P.
    Santarelli, M.
    Borchiellini, R.
    Cali, M.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2008, 33 (12) : 3167 - 3172
12345