An investigation of LaNi1-xFexO3 as a cathode material for solid oxide fuel cells

被引:291
|
作者
Chiba, R [1 ]
Yoshimura, F [1 ]
Sakurai, Y [1 ]
机构
[1] NTT, Integrated Informat & Energy Syst Labs, Tokai, Ibaraki 3191193, Japan
关键词
conductivity; perovskite; oxide; thermal expansion; SOFC;
D O I
10.1016/S0167-2738(99)00222-2
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
We prepared La(Ni-M)O-3 (M Al, Cr, Mn, Fe, Co, Ga) samples and investigated their characteristics as solid oxide fuel cell (SOFC) cathode materials. We found that the LaNi1-xFeXO3 satisfies the important requirements for a cathode, if x in this system is around 0.4. This system has its highest electronic conductivity of 580 S/cm at 800 degrees C, when x in LaNi1-xFexO3 is 0.4. This value is more than three times higher than that of La0.8Sr0.2MnO3 (180 S/cm). The average thermal expansion coefficient of LaNi0.6Fe0.4O3 from 30 to 1000 degrees C is relatively low (11.4 x 10(-6) K-1) and closer to the 0.92 ZrO2-0.08 Y2O3 (YSZ) value (10.0 x 10(-6) K-1) than La0.8Sr0.2MnO3 (12.0 x 10(-6) K-1). (C) 1999 Published by Elsevier Science B.V. All rights reserved.
引用
收藏
页码:281 / 288
页数:8
相关论文
共 50 条
  • [31] Preparation and characterization of Pr1-xSrxFeO3 cathode material for intermediate temperature solid oxide fuel cells
    Piao, Jinhua
    Sun, Kening
    Zhang, Naiqing
    Chen, Xinbing
    Xu, Shen
    Zhou, Derui
    JOURNAL OF POWER SOURCES, 2007, 172 (02) : 633 - 640
  • [32] Mechanism of chromium poisoning the conventional cathode material for solid oxide fuel cells
    Zhang, Xiaoqiang
    Yu, Guangsen
    Zeng, Shumao
    Parbey, Joseph
    Xiao, Shuhao
    Li, Baihai
    Li, Tingshuai
    Andersson, Martin
    JOURNAL OF POWER SOURCES, 2018, 381 : 26 - 29
  • [33] Synthesis and properties of LaNi1−xFexO3−δ as cathode materials in SOFC
    Nipaka Sukpirom
    Sirinoot Iamsaard
    Sumittra Charojrochkul
    Jinda Yeyongchaiwat
    Journal of Materials Science, 2011, 46 : 6500 - 6507
  • [34] PROPERTIES OF COPPER DOPED NEODYMIUM NICKELATE OXIDE AS CATHODE MATERIAL FOR SOLID OXIDE FUEL CELLS
    Lee, Kyoung-Jin
    Choe, Yeong-Ju
    Hwang, Hae-Jin
    ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (02) : 625 - 628
  • [35] Preparation and properties of BaxSr1-xCoyFe1-yO3-δ cathode material for intermediate temperature solid oxide fuel cells
    Zhao, Hailei
    Shen, Wei
    Zhu, Zhiming
    Li, Xue
    Wang, Zhifeng
    JOURNAL OF POWER SOURCES, 2008, 182 (02) : 503 - 509
  • [36] Ln1-xSrxMnO3(Ln=Pr, Nd, Sm and Gd) as the cathode material for solid oxide fuel cells
    Sakaki, Yoshinori
    Takeda, Yasuo
    Kato, Ai
    Imanishi, Nobuyuki
    Yamamoto, Osamu
    Hattori, Masatoshi
    Esaki, Yoshimi
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1999, 46 (03): : 293 - 299
  • [37] Ln1-xSrxMnO3 (Ln = Pr, Nd, Sm and Gd) as the cathode material for solid oxide fuel cells
    Sakaki, Y
    Takeda, Y
    Kato, A
    Imanishi, N
    Yamamoto, O
    Hattori, M
    Iio, M
    Esaki, Y
    SOLID STATE IONICS, 1999, 118 (3-4) : 187 - 194
  • [38] Characterization of NdSrCo1-xFexO4+δ (0 ≤ x ≤ 1.0) intergrowth oxide cathode materials for intermediate temperature solid oxide fuel cells
    Song, Ki-Woog
    Lee, Ki-Tae
    CERAMICS INTERNATIONAL, 2011, 37 (02) : 573 - 577
  • [39] LaNi1-xCoxO3-δ (x=0.4 to 0.7) cathodes for solid oxide fuel cells by infiltration
    Chrzan, Aleksander
    Ovtar, Simona
    Chen, Ming
    39TH INTERNATIONAL MICROELECTRONICS AND PACKAGING IMAPS POLAND 2015 CONFERENCE, 2016, 104
  • [40] LaNi0.6Fe0.4O3- as a Promising Cathode for Stable Proton-conducting Solid Oxide Fuel Cells
    Chen, K.
    Dai, H.
    He, S.
    Bi, L.
    FUEL CELLS, 2018, 18 (04) : 561 - 565