Microstructural Evolution of ETIAL 160 Aluminium Alloy Feedstock Produced by Cooling Slope Casting

被引：3

作者：

Saklakoglu, Nursen ^{[1
]}

Birol, Yucel ^{[2
]}

Kasman, Sefika ^{[3
]}

机构：

[1] Celal Bayar Univ, Dept Mech Engn, Manisa, Turkey

[2] TUBITAK, Marmara Res Ctr, Mat Inst, Izmir, Kocaeli, Turkey

[3] Dokuz Eylul Univ, Izmir Vocat Sch, Dept Tech Program, Izmir, Turkey

来源：

SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES X | 2008年 / 141-143卷

关键词：

Semisolid processing; Cooling slope casting; Aluminium alloys;

D O I：

10.4028/www.scientific.net/SSP.141-143.575

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Owing to its superior flow and mould-filling capability, a fully globular structure is essential for semisolid processing technologies. The present work was undertaken to identify the cooling slope casting process parameters that, upon heating to the semisolid state, gives the required globular structure for the ETIAL 160 alloy. Of the two pouring temperatures investigated, 605 degrees C and 615 degrees C. the lower pouring temperature was found to provide more globular grains surrounded by liquid phases.

引用

页码：575 / +

页数：2

共 50 条

[41] EVOLUTION OF AS-CAST MICROSTRUCTURES OF 356 ALUMINIUM ALLOY CAST BY LIQUIDUS CASTING
J.Dong
G.M.Lu
J.Z.Cui
Z.H.Zhao
Acta Metallurgica Sinica(English Letters), 2003, (01) : 60 - 64
[42] Evolution of as-cast microstructures of 356 aluminium alloy cast by liquidus casting
Dong, J.
Lu, G.M.
Cui, J.Z.
Zhao, Z.H.
Acta Metallurgica Sinica (English Letters), 2003, 16 (01) : 60 - 64
[43] Microstructural and Electrochemical behaviour of Aluminium Alloy Composites Produced Using Different Sintering Techniques
Muthuchamy, A.
Annamalai, A. Raja
Acharyya, Swati Ghosh
Nagaraju, Nidhi
Agrawal, Dinesh K.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2018, 21 (03):
[44] Modeling of microstructural evolution and flow stress of aluminium alloy during thermomechanical process
沈健
G.Gottstein
Transactions of Nonferrous Metals Society of China, 2004, (03) : 491 - 495
[45] Microstructural evolution and plastic stability during superplastic flow in a 7475 aluminium alloy
Iwasaki, H
Mori, T
Mabuchi, M
Higashi, K
MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (02) : 180 - 184
[46] Modeling of microstructural evolution and flow stress of aluminium alloy during thermomechanical process
Shen, J
Gottstein, G
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2004, 14 (03) : 491 - 495
[47] Microstructural and Vickers Microhardness Evolution of Heat Treated Secondary Aluminium Cast Alloy
Hurtalova, Lenka
Tillova, Eva
Chalupova, Maria
LOCAL MECHANICAL PROPERTIES IX, 2014, 586 : 137 - 140
[48] Cast structure of a 7075 alloy produced by a water-cooling centrifugal casting method
Yeh, Jien-Wei
Jong, Shang-Haw
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1994, 25 A (03): : 643 - 650
[49] THE CAST STRUCTURE OF A 7075 ALLOY PRODUCED BY A WATER-COOLING CENTRIFUGAL CASTING METHOD
YEH, JW
JONG, SH
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (03): : 643 - 650
[50] Mechanism of Microstructural Refinement of Al-Cu Alloy During Low Melt Sheared Slope Casting
N. S. Barekar
R. Pradhan
B. K. Dhindaw
Journal of Materials Engineering and Performance, 2014, 23 : 439 - 443

← 1 2 3 4 5 →