Microstructural Evolution of ETIAL 160 Aluminium Alloy Feedstock Produced by Cooling Slope Casting

被引：3
|
作者：
Saklakoglu, Nursen [1 ]
Birol, Yucel [2 ]
Kasman, Sefika [3 ]
机构：
[1] Celal Bayar Univ, Dept Mech Engn, Manisa, Turkey
[2] TUBITAK, Marmara Res Ctr, Mat Inst, Izmir, Kocaeli, Turkey
[3] Dokuz Eylul Univ, Izmir Vocat Sch, Dept Tech Program, Izmir, Turkey
来源：
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES X | 2008年 / 141-143卷
关键词：
Semisolid processing; Cooling slope casting; Aluminium alloys;
D O I：
10.4028/www.scientific.net/SSP.141-143.575
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Owing to its superior flow and mould-filling capability, a fully globular structure is essential for semisolid processing technologies. The present work was undertaken to identify the cooling slope casting process parameters that, upon heating to the semisolid state, gives the required globular structure for the ETIAL 160 alloy. Of the two pouring temperatures investigated, 605 degrees C and 615 degrees C. the lower pouring temperature was found to provide more globular grains surrounded by liquid phases.
引用
收藏
页码：575 / +
页数：2
相关论文
共 50 条
  • [1] A357 thixoforming feedstock produced by cooling slope casting
    Birol, Yucel
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 186 (1-3) : 94 - 101
  • [2] MICROSTRUCTURAL CHANGES OF ALUMINIUM ALLOY A319 ON COOLING SLOPE PLATE
    Aziz, Ahmad Muhammad
    Omar, Mohd Zaidi
    Sajuri, Zainuddin
    Salleh, Mohd Shukor
    JURNAL TEKNOLOGI, 2016, 78 (6-9): : 121 - 127
  • [3] Cooling slope casting to obtain thixotropic feedstock II: observations with A356 alloy
    E. Cardoso Legoretta
    H. V. Atkinson
    H. Jones
    Journal of Materials Science, 2008, 43 : 5456 - 5469
  • [4] Cooling slope casting to obtain thixotropic feedstock II: observations with A356 alloy
    Legoretta, E. Cardoso
    Atkinson, H. V.
    Jones, H.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (16) : 5456 - 5469
  • [5] Microstructural and Statistical Study of Semisolid Casting of 6061 Alloy Using a Miniature Cooling Slope
    Mahdi Hajihashemi
    Behzad Niroumand
    Morteza Shamanian
    Metallurgical and Materials Transactions B, 2014, 45 : 1804 - 1816
  • [6] Microstructural and Statistical Study of Semisolid Casting of 6061 Alloy Using a Miniature Cooling Slope
    Hajihashemi, Mahdi
    Niroumand, Behzad
    Shamanian, Morteza
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (05): : 1804 - 1816
  • [7] Microstructure evolution of A356 aluminum alloy produced by cooling slope method
    Nourouzi, Selman
    Ghavamodini, Sayed Mandi
    Baseri, Hamid
    Kolandooz, Amin
    Botkan, Mohammad
    ADVANCES IN METALLURGICAL AND MINING ENGINEERING, 2012, 402 : 272 - 276
  • [8] Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope
    Das, Prosenjit
    Samanta, Sudip. K.
    Venkatpathi, B. R. K.
    Chattopadhyay, Himadri
    Dutta, Pradip
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2012, 65 (06) : 669 - 672
  • [9] Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope
    Prosenjit Das
    Sudip. K. Samanta
    B. R. K. Venkatpathi
    Himadri Chattopadhyay
    Pradip Dutta
    Transactions of the Indian Institute of Metals, 2012, 65 : 669 - 672
  • [10] Thimforming of non-dendritic AA6061 feedstock produced by low superheat casting with and without a cooling slope
    Birol, Yucel
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2007, 98 (10) : 1019 - 1024
12345