Optimization of process parameters on warpage of plastic part fabricated using injection moulding via Taguchi method

被引：0
|
作者：
Ali, M. A. M. [1 ]
Idayu, N. [1 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Fac Mfg Engn, Durian Tunggal 76100, Melaka, Malaysia
来源：
INNOVATIVE RESEARCH AND INDUSTRIAL DIALOGUE 2016 (IRID'16) | 2017年
关键词：
Optimisation; warpage; Taguchi method;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the main objective is to optimize the injection moulding process parameters such as mould temperature, melt temperature, injection time and cooling time on warpage of plastic. Autodesk Simulation Moldflow software was used to run the simulation of the plastic part to get the recommended parameters. The experiment was conducted by using Taguchi L9 orthogonal array. It was found that optimum parametric combination are at mould temperature of 56 degrees C, melt temperatureof 250 degrees C, injection time of 0.70s and cooling time of 15.4 seconds. The melt temperature was identified as the most significant parameter that affect the warpage of plastic part.
引用
收藏
页码：59 / 60
页数：2
相关论文
共 50 条
  • [41] Dimensional Accuracy Optimization of the Micro-plastic Injection Molding Process Using the Taguchi Design Method
    Kuo, Chil-Chyuan
    Liao, Hsin-You
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2015, 21 (02): : 244 - 248
  • [42] Optimization of the plastic injection molding process using the Taguchi method, RSM, and hybrid GA-PSO
    Wen-Chin Chen
    Manh-Hung Nguyen
    Wen-Hsin Chiu
    Te-Ning Chen
    Pei-Hao Tai
    The International Journal of Advanced Manufacturing Technology, 2016, 83 : 1873 - 1886
  • [43] Optimization of compression moulding parameters for multi filler polymer composite using Taguchi method
    Jamil, N. A.
    Selamat, M. Z.
    Hasan, R.
    Sahari, J.
    Daud, M. A. M.
    Tahir, M. M.
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2016, 2016, : 137 - 138
  • [44] Optimization of vacuum casting process parameters using Taguchi method
    Ahmad, Mohd Nazri
    Alkahari, Mohd Rizal
    Basir, Mohamad Faris Mohd
    Maidin, Nurul Ain
    Wahid, Mohammad Khalid
    Ab Rahman, Mohd Hidayat
    Osman, Mohd Hairizal
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 146 - 147
  • [45] OPTIMIZATION OF INJECTION MOULDING PROCESS VIA DESIGN OF EXPERIMENT (DOE) METHOD BASED
    Jaya, Haliza
    Zulkepli, Nik Noriman
    Omar, Mohd Firdaus
    Abd Rahim, Shayfull Zamree
    Nabialek, Marcin
    Jez, Kinga
    Abdullah, Mohd Mustafa Al Bakri
    ARCHIVES OF METALLURGY AND MATERIALS, 2022, 67 (02) : 719 - 727
  • [46] Recent progress in minimizing the warpage and shrinkage deformations by the optimization of process parameters in plastic injection molding: a review
    Zhao, Nan-yang
    Lian, Jiao-yuan
    Wang, Peng-fei
    Xu, Zhong-bin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (1-2): : 85 - 101
  • [47] Recent progress in minimizing the warpage and shrinkage deformations by the optimization of process parameters in plastic injection molding: a review
    Nan-yang Zhao
    Jiao-yuan Lian
    Peng-fei Wang
    Zhong-bin Xu
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 85 - 101
  • [48] Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method
    Mehat, Nik Mizamzul
    Kamaruddin, Shahrul
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (12) : 1989 - 1994
  • [49] Optimization Of Process Parameters In Injection Moulding Of A Polymer Composite Product By Using Gra
    Kumar, B. Prasad
    Venkataramaiah, P.
    Ganesh, J. Siddi
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 4637 - 4647
  • [50] Warpage Optimisation in Injection Moulding Process using Response Surface Methodology (RSM)
    Asyirah, B. N.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Rashidi, M. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
12345