Pore Shape Changes and Apatite Formation on Zn and Si Ion-Doped HA Films of Ti-6Al-4V After Plasma Electrolytic Oxidation Treatment

被引：4

作者：

Hwang, In-Jo

Choe, Han-Cheol ^{[1
]}

机构：

[1] Chosun Univ, Coll Dent, Dept Dent Mat, Gwangju 61452, South Korea

来源：

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2018年 / 18卷 / 02期

关键词：

Zinc (Zn); Silicon (Si); Plasma Electrolytic Oxidation (PEO); Bone-Like Apatite Formation; Pore Formation; Shape; COATINGS; ZINC; CORROSION; ALLOYS; CA;

D O I：

10.1166/jnn.2018.14881

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

In this study, pore shape changes and apatite formation on zinc (Zn) and silicon (Si) ion-doped hydroxyapatite (HA) films of Ti-6Al-4V by plasma electrolytic oxidation (PEO) treatment has been investigated by several techniques. The PEO films and the Ti-6Al-4V surface after immersion in SBF were observed by X-ray spectroscopy, field-emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The number of pores decreased as Zn ion concentration increased from 5Zn to 10Zn. The maximum size of pores were increased from 5Zn to 20Zn concentration, whereas, the minimum size of pores decreased. The amount of bone-like apatite formation for the 5Zn/5Si sample was higher than those of other samples immersed in SBF.

引用

页码：1442 / 1444

页数：3

共 50 条

[41] Microstructure and corrosion performance of plasma electrolytic oxidation coatings on the surface of conventional and selective laser melted Ti-6Al-4V alloy
Khorasanian, Mehdi
Yeganeh, Mahdi
Zaree, Seyed Reza Alavi
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2022, 10 (03)
[42] Bioactive element coatings on nano-mesh formed Ti-6Al-4V alloy surface using plasma electrolytic oxidation
Kim, Seung-Pyo
Cho, Hye-Ri
Choe, Han-Cheol
SURFACE & COATINGS TECHNOLOGY, 2021, 406
[43] The effect of residual stress and gradient nanostructure on the fretting fatigue behavior of plasma electrolytic oxidation coated Ti-6Al-4V alloy
Ao, Ni
Liu, Daoxin
Zhang, Xiaohua
Fan, Kaifa
Shi, Hailan
Liu, Zhen
Liu, Chengsong
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 811
[44] Exploring the surface characteristics and corrosion resistance of MoS2-Zn-doped TiO2 coatings on Ti-6Al-4V via plasma electrolytic oxidation technique for dental implant
Nisar, Sidra Sadaf
Choe, Han-Cheol
SURFACE & COATINGS TECHNOLOGY, 2025, 498
[45] Tribological behavior of different films on Ti-6Al-4V alloy prepared by plasma-based ion implantation
季红兵
夏立芳
马欣新
孙跃
Transactions of Nonferrous Metals Society of China, 2000, (04) : 493 - 497
[46] Tribological behavior of different films on Ti-6Al-4V alloy prepared by plasma-based ion implantation
Ji, HB
Xia, LF
Ma, XX
Sun, Y
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2000, 10 (04) : 493 - 497
[47] Formation of Ca/P ceramic coatings by Plasma Electrolytic Oxidation (PEO) on Ti6Al4V ELI alloy
Rodriguez-Jaimes, Y.
Naranjo, D. I.
Blanco, S.
Garcia-Vergara, S. J.
4TH INTERNATIONAL MEETING FOR RESEARCHERS IN MATERIALS AND PLASMA TECHNOLOGY (4TH IMRMPT), 2017, 935
[48] Formation of Ca, P, and Zn-doped ZrO2/TiO2 coating layer via plasma electrolytic oxidation and magnetic sputtering: Improving surface characteristics and biocompatibility of Ti-6Al-4V alloy
Nisar, Sidra Sadaf
Arun, S.
Toan, Nguyen Khanh
Ahn, Sang -Gun
Choe, Han-Cheol
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 31 : 1282 - 1303
[49] Investigation of the voltage and time effects on the formation of hydroxyapatite-containing titania prepared by plasma electrolytic oxidation on Ti-6Al-4V alloy and its corrosion behavior
Montazeri, M.
Dehghanian, C.
Shokouhfar, M.
Baradaran, A.
APPLIED SURFACE SCIENCE, 2011, 257 (16) : 7268 - 7275
[50] Enhanced fatigue performance of modified plasma electrolytic oxidation coated Ti-6Al-4V alloy: Effect of residual stress and gradient nanostructure
Ao, Ni
Liu, Daoxin
Zhang, Xiaohua
Liu, Chengsong
APPLIED SURFACE SCIENCE, 2019, 489 : 595 - 607

← 1 2 3 4 5 →