Wear behaviors of PCD tools in turning granite

被引：1

作者：

Zhang, Rui ^{[1
]}

Kou, Zili ^{[1
]}

Dou, Yunwei ^{[1
]}

Liu, Shenzhuo ^{[1
]}

Wang, Haikuo ^{[1
]}

Wang, Kaixue ^{[1
]}

Chen, Ying ^{[1
]}

Ma, Huan ^{[1
]}

Liu, Chengliang ^{[1
]}

机构：

[1] Sichuan Univ, Inst Atom & Mol Phys, Chengdu 610065, Peoples R China

来源：

MATERIALS PROCESSING TECHNOLOGY | 2011年 / 337卷

关键词：

Polycrystalline diamond (PCD); Wear; Granite bars; Taylor equation; METAL-MATRIX COMPOSITES; PERFORMANCE; CARBIDE; LIFE; PCBN;

D O I：

10.4028/www.scientific.net/AMR.337.728

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The performance and wear mechanisms of two types of polycrystalline diamond (PCD) cutting tools (marked as PCD 010 and PCD 030) have been investigated in this paper. Continuous turning of round granite bars has been selected as the test method. The Taylor equation has been developed to describe the tool performance. The experimental results indicate that PCD 010 has a greater thermal wear resistance than PCD 030 at high cutting speeds. Scanning electron microscopy (SEM) was used to evaluate wear mechanisms of PCD tools, our results show that the dominant wear mechanisms for PCD 010 is abrasion wear while that for PCD 030 is inter-granular and cleavage wear.

引用

页码：728 / 734

页数：7

共 50 条

[41] Wear behavior of ZrAlN coated cutting tools during turning
Rogstrom, L.
Johansson-Joesaar, M. P.
Landalv, L.
Ahlgren, M.
Oden, M.
SURFACE & COATINGS TECHNOLOGY, 2015, 282 : 180 - 187
[42] Continuous flank wear measurement of turning tools by integrated microthermocouple
Barlier, C
Lescalier, C
Mosian, A
CIRP ANNALS 1997 MANUFACTURING TECHNOLOGY, VOLUME 46/1/1997: ANNALS OF THE INTERNATIONAL INSTITUTION FOR PRODUCTION ENGINEERING RESEARCH, 1997, 46 : 35 - 38
[43] PCD TOOLS FOR WOODWORKING
LACH, H
INDUSTRIAL DIAMOND REVIEW, 1985, 45 (04): : 166 - 167
[44] Wear behaviors of PCD and diamond-coated tools during low-frequency vibration-assisted drilling CFRP/Ti stacks
Chen, Dexiong
Lin, Hai
Chen, Yan
Yan, Chaoren
Xu, Jiuhua
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 128 (1-2): : 595 - 609
[45] Research on the Wear Characteristics of PDC Diamond Cutting Tools for Natural Granite
Zhao, Dehong
Yan Guangyu
Wu, Yuhou
Ren Wenxiang
ADVANCED TECHNOLOGIES IN MANUFACTURING, ENGINEERING AND MATERIALS, PTS 1-3, 2013, 774-776 : 1026 - 1031
[46] Diamond turning of granite
Wilson, C
Vorono, OA
MACHINING OF NATURAL STONE MATERIALS, 2003, 250 : 138 - 146
[47] Three-dimensional wear parameters and wear mechanisms in turning hardened steels with PCBN tools
Boing, Denis
Schroeter, Rolf Bertrand
de Oliveira, Adilson Jose
WEAR, 2018, 398 : 69 - 78
[48] Wear and Metal Cutting Kinematics in Turning with Periodically Oscillating Tools.
Mueller-Gerbes, H.
Werkstatt und Betrieb, 1977, 110 (05): : 273 - 278
[49] Wear characteristics of coated carbide tools in the turning of ductile cast iron
20162502513968
(1) Graduate School of Engineering, Hiroshima University, Hiroshima, Japan; (2) Daihatsu metal Co. Ltd., Izumo, Shimane, Japan; (3) Shimane Institute for Industrial Technology, Matsue, Shimane, Japan, 1600, Aikoku Alpha; et al.; Japan Machine Tool Builders' Association (JMTBA); JTEKT; Okuma; The Japan Society of Mechanical Engineers (JSME) (Japan Society of Mechanical Engineers):
[50] Tool wear of alumina ceramic tools in high speed turning of steel
Sekiya, K
Kitagawa, R
PROGRESS OF CUTTING AND GRINDING: WITH SOME TOPICS IN ADVANCED MANUFACTURE TECHNOLOGY, 1998, : 169 - 174

← 1 2 3 4 5 →