Wear behaviors of PCD tools in turning granite

被引：1

作者：

Zhang, Rui ^{[1
]}

Kou, Zili ^{[1
]}

Dou, Yunwei ^{[1
]}

Liu, Shenzhuo ^{[1
]}

Wang, Haikuo ^{[1
]}

Wang, Kaixue ^{[1
]}

Chen, Ying ^{[1
]}

Ma, Huan ^{[1
]}

Liu, Chengliang ^{[1
]}

机构：

[1] Sichuan Univ, Inst Atom & Mol Phys, Chengdu 610065, Peoples R China

来源：

MATERIALS PROCESSING TECHNOLOGY | 2011年 / 337卷

关键词：

Polycrystalline diamond (PCD); Wear; Granite bars; Taylor equation; METAL-MATRIX COMPOSITES; PERFORMANCE; CARBIDE; LIFE; PCBN;

D O I：

10.4028/www.scientific.net/AMR.337.728

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The performance and wear mechanisms of two types of polycrystalline diamond (PCD) cutting tools (marked as PCD 010 and PCD 030) have been investigated in this paper. Continuous turning of round granite bars has been selected as the test method. The Taylor equation has been developed to describe the tool performance. The experimental results indicate that PCD 010 has a greater thermal wear resistance than PCD 030 at high cutting speeds. Scanning electron microscopy (SEM) was used to evaluate wear mechanisms of PCD tools, our results show that the dominant wear mechanisms for PCD 010 is abrasion wear while that for PCD 030 is inter-granular and cleavage wear.

引用

页码：728 / 734

页数：7

共 50 条

[1] Study on Wear Behaviors and Grain Effects of PCD Cutting Tools in Turning Granite
Liu, Shenzhuo
Kou, Zili
Zhang, Rui
Liu, Chengliang
Li, Yu
Li, Rongqi
Yan, Xiaozhi
GREEN POWER, MATERIALS AND MANUFACTURING TECHNOLOGY AND APPLICATIONS II, 2012, 214 : 130 - 135
[2] Evaluation of the tool wear in the turning process of INCONEL 718 using PCD tools
Ribeiro da Silva, Leonardo Rosa
Rodrigues Campos, Felipe dos Anjos
Sales, Wisley Falco
Machado, Alisson Rocha
49TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 49, 2021), 2021, 53 : 276 - 285
[3] Tool wear in laser ultrasonically combined turning of tungsten carbide with PCD tools
Zhang, Changjuan
Jiao, Feng
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (7-8): : 2201 - 2213
[4] Tool wear in laser ultrasonically combined turning of tungsten carbide with PCD tools
Changjuan Zhang
Feng Jiao
The International Journal of Advanced Manufacturing Technology, 2020, 111 : 2201 - 2213
[5] Study on the wear and breakage of PCD tools for turning Si-Al alloy pistons
Zhang, J. H.
Zhang, X. H.
Li, L.
Shang, Z. H.
Bai, W. F.
ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 108 - 112
[6] Analysis and Optimization of Sintered Carbides Turning with PCD Tools
Zebala, Wojciech
Kowalczyk, Robert
Matras, Andrzej
25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 : 283 - 290
[7] Wear Behaviors of Ceramic and Carbide Tools during Turning Martensitic Stainless Steel
Wang, Min
Wang, Li-Li
Ai, Xing
Zhao, Jun
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2017, 38 (01): : 63 - 72
[8] Design of adjustable chip breaker for PCD turning tools
Wu, Maochao
Yu, Aibing
Chen, Qiujie
Wang, Yanlin
Yuan, Jiandong
Sun, Lei
Chi, Jianying
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 172
[9] Diamond Tools for Machining of Granite and Their Wear
Kenda, Jani
Kopac, Janez
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2009, 55 (12): : 775 - 780
[10] Study of cutting force and tool wear during turning of aluminium with WC, PCD and HFCVD coated MCD tools
Pattnaik, Sisira Kanta
Behera, Minaketan
Padhi, Sachidananda
Dash, Pusparaj
Sarangi, Saroj Kumar
MANUFACTURING REVIEW, 2020, 7

← 1 2 3 4 5 →