Investigation on hot cracking during laser welding by means of experimental and numerical methods

被引：7
|
作者：
Gao, H. [1 ]
Agarwal, G. [1 ]
Amirthalingam, M. [2 ]
Hermans, M. J. M. [1 ]
Richardson, I. M. [1 ]
机构：
[1] Delft Univ Technol, Mat Sci & Engn Dept, Mekelweg 2, NL-2628 CD Delft, Netherlands
[2] Indian Inst Technol Madras, Dept Met & Mat Engn, Madras 600036, Tamil Nadu, India
来源：
WELDING IN THE WORLD | 2018年 / 62卷 / 01期
关键词：
Hot cracking; Laser welding; Digital image correlation; Finite element model; Temporal and spatial validation; SOLIDIFICATION CRACKING; MULTIPASS WELDS; CRITERION; STEELS; GROWTH; STRAIN; TESTS;
D O I：
10.1007/s40194-017-0524-z
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Hot cracking during laser welding of Transformation Induce Plasticity (TRIP) steel at the edges of steel flanges can be a problem. In this study, modified hot cracking tests were performed by welding on a single-side clamped specimen at various distances from the free edge, while the heat input and external constraints remained constant. In situ temperature and strain measurements were carried out using pre-attached thermocouples and digital image correlation, respectively. A thermal-mechanical finite element (FE) model was constructed and validated with the temporal and spatial data measured. From the validated FE model, the temperature and strain evolution in the weld mushy zone were studied. A critical strain for the onset of hot cracking in the TRIP steel examined was found to be in the range of 3.2 to 3.6%. This threshold was further evaluated and experimentally confirmed by welding with different heat inputs.
引用
收藏
页码：71 / 78
页数：8
相关论文
共 50 条
  • [41] ASSESSING RESISTANCE OF METALS AND ALLOYS TO HOT CRACKING DURING WELDING
    TURI, A
    AUTOMATIC WELDING USSR, 1969, 22 (01): : 8 - &
  • [42] MACHINE FOR DETERMINING SUSCEPTIBILITY OF METALS TO HOT CRACKING DURING WELDING
    YAKUSHIN, BF
    PROKHORO.NN
    NOVIKOV, NN
    AUTOMATIC WELDING USSR, 1970, 23 (10): : 46 - &
  • [43] RESISTANCE OF TYPE 1201 ALLOYS TO HOT CRACKING DURING WELDING
    ISHCHENK.AY
    IGNATEV, VG
    STEPANOV, VF
    AUTOMATIC WELDING USSR, 1972, 25 (08): : 71 - 72
  • [44] Preventing weld hot cracking by synchronous rolling during welding
    Liu, W
    Tian, X
    Zhang, X
    WELDING JOURNAL, 1996, 75 (09) : S297 - S304
  • [45] Numerical and experimental study of the hot cracking phenomena in 6061/7075 dissimilar aluminum alloy resistance spot welding
    Li, Hong
    Yan, Weijia
    Li, Zhuoxin
    Mariusz, Bober
    Senkara, Jacek
    Zhang, Yu
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 77 : 794 - 808
  • [46] Development of a novel optical measurement technique to investigate the hot cracking susceptibility during laser beam welding
    Bakir, N.
    Pavlov, V.
    Zavjalov, S.
    Volvenko, S.
    Gumenyuk, A.
    Rethmeier, M.
    WELDING IN THE WORLD, 2019, 63 (02) : 435 - 441
  • [47] Assessment of the hot cracking susceptibility of austenitic stainless Cr-Ni-steels during laser welding
    Engert, J
    Gebur, J
    Hannemann, A
    Krause, HJ
    Schobbert, H
    ECLAT - EUROPEAN CONFERENCE ON LASER TREATMENT OF MATERIALS, 1998, : 303 - 308
  • [48] Development of a novel optical measurement technique to investigate the hot cracking susceptibility during laser beam welding
    N. Bakir
    V. Pavlov
    S. Zavjalov
    S. Volvenko
    A. Gumenyuk
    M. Rethmeier
    Welding in the World, 2019, 63 : 435 - 441
  • [49] Numerical investigation of the transient interfacial material behavior during laser impact welding
    Gleason, Glenn
    Sunny, Sumair
    Mathews, Ritin
    Malik, Arif
    SCRIPTA MATERIALIA, 2022, 208
  • [50] Numerical investigation on laser welding of titanium plates
    Kalins, B.
    Naveen, Vicharapu
    Girisha, L.
    Kumar, Uppala Nutan
    Subbiah, Ram
    Marichamy, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 2224 - 2227
12345