OPTIMIZATION OF CORROSION BEHAVIOR IN SUBMERGED FRICTION STIR PROCESSED MAGNESIUM AZ31B ALLOY

被引:0
|
作者
Ramaiyan, Sankar [1 ]
Mani, Udayakumar [1 ]
Chandran, Rathinasuriyan [1 ]
Santhanam, Senthil Kumar Velukkudi [1 ]
机构
[1] Anna Univ, Dept Mech Engn, Coll Engn, Guindy Campus, Madras, Tamil Nadu, India
关键词
MECHANICAL-PROPERTIES; PROCESS PARAMETERS; MICROSTRUCTURE; PROGRESS;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this research, friction stir processing of AZ31B magnesium alloy of 6 mm thickness was done in submerged conditions. The process parameters, i.e. tool pin profile (simple cylindrical, stepped cylindrical, stepped square), rotational speed ranging from 800 to 1200 rpm and traverse speed ranging from 0.5 to 1.5 mm/sec were optimized using the multi response optimization technique. The experiment was conducted with L-27 orthogonal arrays. The Immersion test and hardness have been considered as output response. From the view of an application, it would be more significant to optimize the Immersion Corrosion rate and Hardness of Submerged Friction Stir Processed AZ31B alloy. Thus, this study aims at optimizing the process parameters, including various tool pin profiles, feed rates and rotational speeds with corrosion rate and micro hardness using TOPSIS. Using analysis of variance (ANOVA), the most significant parameter effect of the submerged friction stir processing was determined.
引用
收藏
页数:9
相关论文
共 50 条
  • [21] Microstructure and mechanical properties of a double-pass friction stir processed AZ31B magnesium alloy
    Xu Nan
    Gu Bo-Kun
    Fan Yue
    Shen Jun
    Song Qi-Ning
    Zhao Jian-Hua
    Bao Ye-Feng
    MATERIALS SCIENCE AND TECHNOLOGY, 2023, 39 (02) : 168 - 176
  • [22] Effect of Scroll Pin Profile and Tool Rotational Speed on Mechanical Properties of Submerged Friction Stir Processed AZ31B Magnesium Alloy
    Ramaiyan, Sankar
    Santhanam, Senthil Kumar Velukkudi
    Muthuguru, Puviyarasan
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2018, 21 (03):
  • [23] Enhancing grain refinement and corrosion behavior in AZ31B magnesium alloy via stationary shoulder friction stir processing
    Patel, Vivek
    Li, Wenya
    Andersson, Joel
    Li, Na
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 17 : 3150 - 3156
  • [24] Drilling-filling friction stir repairing of AZ31B magnesium alloy
    Huang, Ruofei
    Ji, Shude
    Meng, Xiangchen
    Li, Zhengwei
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 255 : 765 - 772
  • [25] Enhancement of formability in magnesium alloy AZ31B via friction stir processing
    Sato, Y. S.
    Sasaki, A.
    Sugimoto, A.
    Honda, A.
    Kokawa, H.
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 3775 - +
  • [26] Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy
    Afrin, N.
    Chen, D. L.
    Cao, X.
    Jahazi, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 472 (1-2): : 179 - 186
  • [27] Defect formation analysis of Friction Stir welded Magnesium AZ31B alloy
    Gulati, Piyush
    Shukla, Dinesh Kumar
    Gupta, Akash
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 1005 - 1012
  • [28] Submerged friction stir processing of AZ31 Magnesium alloy
    Darras, Basil
    Kishta, Emad
    MATERIALS & DESIGN, 2013, 47 : 133 - 137
  • [29] Wear behavior of HPT processed UFG AZ31B magnesium alloy
    Seenuvasaperumal, P.
    Doi, K.
    Basha, Dudekula Althaf
    Singh, Alok
    Elayaperumal, A.
    Tsuchiya, Koichi
    MATERIALS LETTERS, 2018, 227 : 194 - 198
  • [30] Investigation on microstructure and mechanical properties of cold source assistant friction stir processed AZ31B magnesium alloy
    Xu, Nan
    Song, Qining
    Bao, Yefeng
    Fujii, Hidetoshi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 761