Investigation of a two impinging-jets contacting device for liquid-liquid extraction processes

被引:47
|
作者
Saien, Javad [1 ]
Zonouzian, S. Alireza Ebrahimzadeh
Dehkordi, Asghar Molaei
机构
[1] Sharif Univ Technol, Dept Chem & Petr Engn, Tehran, Iran
[2] Bu Ali Sina Univ, Dept Appl Chem, Hamedena 65174, Iran
关键词
impinging jets; impinging streams; liquid extraction; mass transfer; liquid-liquid separations; transport processes;
D O I
10.1016/j.ces.2006.01.034
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
A two impinging-jets contacting device (TIJCD) for liquid-liquid extraction processes was proposed and tested through the standard test system recommended by the European Federation of Chemical Engineering (EFCE), toluene-acetone-water, as a typical example of liquid-liquid extraction processes. The results obtained for the overall volumetric mass transfer coefficient (capacity coefficient) were more than three times higher than those reported in the conventional contactors and in an air-driven two impinging-streams contactor. These experimental results clearly indicate the greater performance capability of TIJCD relative to those of conventional contactors. To have a perfect study on the pertinent parameters of the TlJCD, the influence of jets momentum, nozzles diameter and the inter nozzle distance have been investigated. In addition, the enhancing effect of the impingement zone has been studied using a non-impinging-jets contacting device. Based on the experimental data obtained, an increase in the liquid flow rates results in an increase in the extraction efficiency and overall volumetric mass-transfer coefficient, while increasing the distance between nozzles decreases the extraction efficiency. In addition, it was found that the effect of nozzle diameter on the extraction efficiency could be dependent upon the jets velocity. (c) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3942 / 3950
页数:9
相关论文
共 50 条
  • [41] LIQUID-LIQUID EXTRACTION
    HARRIS, DK
    VASHIST, PN
    BECKMANN, RB
    INDUSTRIAL AND ENGINEERING CHEMISTRY, 1966, 58 (11): : 97 - &
  • [42] Predictive functional control for separation processes by liquid-liquid extraction
    Vanel, V.
    Mallet, J.
    Dinh, B.
    Michaud, S.
    Montuir, M.
    Vilpini, F.
    FRONTIERS IN CHEMICAL ENGINEERING, 2024, 5
  • [43] Practical Experience in Design and Operation of Liquid-Liquid Extraction Processes
    Weber, Manfred
    CHEMIE INGENIEUR TECHNIK, 2019, 91 (11) : 1515 - 1521
  • [44] STABILITY OF JETS IN LIQUID-LIQUID SYSTEMS
    KITAMURA, Y
    MISHIMA, H
    TAKAHASHI, T
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1982, 60 (06): : 723 - 731
  • [45] DYNAMIC BREAKUP OF LIQUID-LIQUID JETS
    RICHARDS, JR
    LENHOFF, AM
    BERIS, AN
    PHYSICS OF FLUIDS, 1994, 6 (08) : 2640 - 2655
  • [46] Microgels for the Intensification of Liquid-Liquid Extraction Processes - Feasibility and Advantages
    Faulde, Miriam
    Tonn, Josia
    Jupke, Andreas
    CHEMICAL ENGINEERING & TECHNOLOGY, 2020, 43 (01) : 137 - 142
  • [47] Breakup of the Water Sheet Formed by Two Liquid Impinging Jets
    Xia, Yakang
    Khezzar, Lyes
    Bojanampati, Shrinivas
    Molki, Arman
    INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING, 2019, 2019
  • [48] Application of an air-operated two impinging streams extractor in liquid-liquid extraction and comparison with other contactor types
    Dehkordi, AM
    Kaghazchi, T
    Sohrabi, M
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2001, 79 (02): : 227 - 235
  • [49] Numerical simulation of two liquid impinging jets with SPH method
    Han, Y.-W. (han_ya_wei@163.com), 1600, Tsinghua University (30):
  • [50] An experimental investigation on the interaction of hydraulic jumps formed by two normal impinging circular liquid jets
    Kate, R. P.
    Das, P. K.
    Chakraborty, Suman
    JOURNAL OF FLUID MECHANICS, 2007, 590 : 355 - 380