Effect of Alumina and Silicon Carbide Nanoparticle-Infused Polymer Matrix on Mechanical Properties of Unidirectional Carbon Fiber-Reinforced Polymer

Unidirectional carbon fiber-reinforced polymer nanocomposites were developed by adding alumina (Al2O3) and silicon carbide (SiC) nanoparticles using ultrasonication and magnetic stirring. The uniform nanoparticle dispersions were examined with a field-emission scanning electron microscope. The nano-phase matrix was then utilized to fabricate the hybrid carbon fiber-reinforced polymer nanocomposites by hand lay-up and compression molding. The weight fractions selected for Al2O3 and SiC nanoparticles were determined based on improvements in mechanical properties. Accordingly, the hybrid nanocomposites were fabricated at weight fractions of 1, 1.5, 1.75, and 2 wt.% for Al2O3. Likewise, the weight fractions selected for SiC were 1, 1.25, 1.5, and 2 wt.%. At 1.75 wt.% Al2O3 nanoparticle loading, the flexural strength modulus improved by 31.76% and 37.08%, respectively. Additionally, the interlaminar shear and impact strength enhanced by 40.95% and 47.51%, respectively. For SiC nanocomposites, improvements in flexural strength (12.79%) and flexural modulus (9.59%) were accomplished at 1.25 wt.% nanoparticle loading. Interlaminar shear strength was enhanced by 34.27%, and maximum impact strength was improved by 30.45%. Effective particle interactions with polymeric chains of epoxy, crack deflection, and crack arresting were the micromechanics accountable for enhancing the mechanical properties of nanocomposites.