Study on Cure-Induced Residual Stresses for Fibre Metal Laminate

被引：0
|
作者：
Yue Guangquan [1 ,2 ]
Zhang Jiazhen [1 ]
Meng Songhe [2 ]
机构：
[1] Beijing Aeronaut Sci & Technol Res Inst COMAC, Beijing, Peoples R China
[2] Harbin Inst Technol, Harbin, Peoples R China
来源：
POLYMERS & POLYMER COMPOSITES | 2013年 / 21卷 / 09期
关键词：
Fibre metal laminate; cure processing; residual stresses; FEM;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
During autoclave curing process, because of the mismatch between coefficients of thermal expansion of fibre layers and metal layers, residual stresses are developed in Fibre Metal Laminates (FML). In this paper, a three-dimensional finite element model was developed to predict cure-induced residual stresses for FML. And then FML-2/1 and FML-3/2 structures (plate and L-shape) were studied with the finite element model. The results show that residual tensile stress is in metal layers and residual compressive stress is in fibre layers. Residual stresses in Fibre Metal Laminates are bigger enough to affect the deformation and fatigue performance.
引用
收藏
页码：561 / 564
页数：4
相关论文
共 50 条
  • [1] Cure-induced residual stresses for warpage reduction in thermoset laminates
    Struzziero, Giacomo
    Nardi, Davide
    Sinke, Jos
    Teuwen, J. J. E.
    JOURNAL OF COMPOSITE MATERIALS, 2020, 54 (22) : 3055 - 3065
  • [2] A review of numerical simulation of cure-induced distortions and residual stresses in thermoset composites
    Ding A.
    Li S.
    Ni A.
    Wang J.
    Li, Shuxin (lishuxin@whut.edu.cn), 1600, Beijing University of Aeronautics and Astronautics (BUAA) (34): : 471 - 485
  • [3] Cure-induced residual stresses assessment of composite materials based on machining deformation
    Liu X.
    Qiao R.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (07): : 4260 - 4269
  • [4] CONSTITUTIVE EQUATION FOR CURE-INDUCED STRESSES IN A VISCOELASTIC MATERIAL
    MARTIN, JE
    ADOLF, D
    MACROMOLECULES, 1990, 23 (23) : 5014 - 5019
  • [5] Cure-induced and thermal stresses in a constrained epoxy resin
    Merzlyakov, M
    McKenna, GB
    Simon, SL
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (04) : 585 - 591
  • [6] An efficient viscoelastic multiscale model for investigation on the cure-induced microscopic residual stresses of composite laminates
    Liu, Chao
    Liu, Huanyu
    Cao, Xi
    Wu, Xiaojun
    Zhang, Junfeng
    Yan, Long
    POLYMER COMPOSITES, 2024, 45 (11) : 9877 - 9898
  • [7] On The Prediction of Induced Residual Stresses in Fibre Metal Laminates
    Krimbalis, P. P.
    Poon, C.
    Fawaz, Z.
    Behdinan, K.
    DESIGN, MANUFACTURI NG AND APPLICATIONS OF COMPOSITES, 2008, : 125 - 132
  • [8] Modeling of Cure-Induced Residual Stresses in 3D Woven Composites of Different Reinforcement Architectures
    Tsukrov, Igor
    Drach, Borys
    Bayraktar, Harun
    Goering, Jon
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS XII, 2014, 577-578 : 253 - +
  • [9] Cure-induced residual stresses and viscoelastic effects in repaired wind turbine blades: Analytical-numerical investigation
    Varshney, Ayush
    Paul, Daniel
    Mahajan, Puneet
    Mishnaevsky, Leon
    COMPOSITES PART C: OPEN ACCESS, 2024, 15
  • [10] Residual thermal stresses around bonded fibre metal laminate repair patches on an aircraft fuselage
    Vlot, A.
    Soerjanto, T.
    Yeri, I.
    Schelling, J.A.
    International SAMPE Symposium and Exhibition (Proceedings), 1996, 41 (01): : 888 - 902
12345