Cure-induced residual stresses assessment of composite materials based on machining deformation

被引：0
|
作者：
Liu X. [1 ]
Qiao R. [1 ]
机构：
[1] School of Automotive Engineering, Dalian University of Technology, Dalian
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2023年 / 40卷 / 07期
关键词：
composites; cure; machining deformation; measurement; residual stress; slitting method;
D O I：
10.13801/j.cnki.fhclxb.20220922.002
中图分类号：
O6 [化学]; TQ03 [化学反应过程]; TQ02 [化工过程（物理过程及物理化学过程）];
学科分类号：
0703 ; 081701 ; 081704 ;
摘要：
Cure-induced residual stresses are usually unavoidable due to anisotropic properties of composite materials, which have great influence on following machining and assembly process. Therefore, it is necessary to understand the distribution of cure-induced residual stresses in the materials for high performance composite part manufacturing. The traditional slitting method used for residual stresses assessment was analyzed and deformations caused by the slitting process were divided into two groups. One was caused by the release of cure-induced residual stresses and the other was by gravity. After the partial deformation caused by gravity being obtained by using finite element analysis, relationship between the remained deformation and the cure-induced residual stresses was set up by using bending deformation theory, which was used to evaluate the distribution of cure-induced residual stresses. Experimental results show that the proposed method can obtain the same distribution as that of the traditional slitting method and the difference may less than 14% when a proper measurement point is selected. © 2023 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：4260 / 4269
页数：9
相关论文
共 26 条
  • [1] MAHMOUDI A H, SHEIKHPOUR M R, HEYDARIAN S., A novel cutting strategy for measuring two components of residual stresses using slitting method[J], Experimental Mechanics, 54, pp. 1237-1246, (2014)
  • [2] SALEHI S D, SHOKRIEH M M., Residual stress measurement using the slitting method via a combination of eigenstrain, regularization and series truncation techniques[J], International Journal of Mechanical Sciences, 152, pp. 558-567, (2019)
  • [3] WANG Qiucheng, KE Yinglin, ZHANG Qiaofang, Evaluation of residual stress depth profiling in 7075 aluminum alloy plates[J], Acta Aeronautica et Astronautica Sinica, 24, 4, pp. 336-338, (2003)
  • [4] GHASEMI A, TABATABAEIAN A, ASGHARI A., Application of slitting method to characterize the effects of thermal fatigue, lay-up arrangement and mwcnts on the residual stresses of laminated composites[J], Mechanics of Materials, 134, pp. 185-192, (2019)
  • [5] GOWER M, SHAW R, WRIGHT K, Et al., Determination of ply level residual stress in a laminated carbon fibre-reinforced epoxy composite using constant, linear and quadratic variations of the incremental slitting method[J], Composites Part A: Applied Science and Manufacturing, 90, pp. 441-450, (2016)
  • [6] SHOKRIEH M, JALILI S, KAMANGAR M., An eigenstrain approach on the estimation of non-uniform residual stress distribution using incremental hole drilling and slitting techniques[J], International Journal of Mechanical Sciences, 148, pp. 383-392, (2018)
  • [7] AKBARI S, TAHERI-BEHROOZ F, SHOKRIEH M., Slitting measurement of residual hoop stresses through the wall-thickness of a filament wound composite ring[J], Experimental Mechanics, 53, pp. 1509-1518, (2013)
  • [8] SHOKRIEH M, AKBARI S, DANESHVAR A., A comparison between the slitting method and the classical lamination theory in determination of macro residual stresses in laminated composites[J], Composite Structures, 96, pp. 708-715, (2013)
  • [9] MATVIENKO Y, PISAREY V, ELEONSKY S, Et al., Determination of fracture mechanics parameters by measurements of local displacements due to crack length increment[J], Fatigue & Fracture of Engineering Materials & Structures, 37, 12, pp. 1306-1318, (2014)
  • [10] SALEHI S, SHOKEIEH M., Repeated slitting safe distance in the measurement of residual stresses[J], International Journal of Mechanical Sciences, 157-158, pp. 599-608, (2019)
123