Tooth contact analysis of elliptical bevel gear with different misalignment

被引：3
|
作者：
Lin, Chao [1 ]
He, Chunjiang [1 ]
机构：
[1] Chongqing Univ, State Key Lab Mech Transmiss, Chongqing, Peoples R China
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2019年 / 233卷 / 07期
基金：
中国国家自然科学基金;
关键词：
Tooth contact analysis; elliptical bevel gear; shaft misalignment; gear processing;
D O I：
10.1177/0954406218791637
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Considering the wide use of bevel gear, a new bevel gear type with variable transmission ratio has been proposed. Based on the manufacturing and generating theory of gear, the mathematical equations for the tooth surface of this gear type has been established with two different methods: lead crowning, which meets the commonly used industrial methods with higher efficiency, lower cost and the method with rack cutter shows much clear relationship of gear meshing process. The contact points and characteristics of transmission errors with different misalignment conditions have been presented. Also the feature of contact area on the tooth surface in a whole cycle was developed in this paper. Compared the contact results of elliptical bevel gear with curve face gear, the former has less misalignments sensitivity and better loaded capability.
引用
收藏
页码：2516 / 2525
页数：10
相关论文
共 50 条
  • [31] Analysis of tooth geometry and modification of equal base circle bevel gear
    Zhang, Wei-hua
    Gong, Yun-peng
    Wang, Dan
    Cai, Chun-yuan
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2000, 21 (04): : 390 - 393
  • [32] Effect on Spiral Bevel Gear Tooth Profile
    Liu, Hongfang
    PROCEEDINGS OF THE 2016 3RD INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING, MANUFACTURING TECHNOLOGY AND CONTROL, 2016, 67 : 15 - 18
  • [33] LOADED TOOTH CONTACT PATTERN ANALYSIS FOR STRAIN WAVE GEAR WITH NON-ELLIPTICAL WAVE GENERATOR
    Yu, Zhiyuan
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2019, VOL 10, 2020,
  • [34] Tooth contact analysis of face gear meshing
    Yan, H. (yhzcsu@163.com), 1600, Central South University of Technology (44):
  • [35] Isogeometric Analysis of Gear with Single Tooth Contact
    Chen L.
    Hao C.
    Wang Z.
    Feng W.
    Yang Y.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2021, 57 (03): : 107 - 115
  • [36] Dependence of Gear Tooth Wear on the Misalignment Angle in Gear Meshes
    Nakhatakyan, F. G.
    Nakhatakyan, D. F.
    JOURNAL OF FRICTION AND WEAR, 2024, 45 (04) : 228 - 232
  • [37] Frictional Effects on Gear Tooth Contact Analysis
    Li, Zheng
    Mao, Ken
    ADVANCES IN TRIBOLOGY, 2013, 2013
  • [38] Dynamic contact characteristics analysis of elliptical cylinder gear under different load conditions
    Dong C.
    Liu Y.
    Wei Y.
    Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2019, 47 (08): : 103 - 107
  • [39] LOADED TOOTH CONTACT ANALYSIS AND STRESSES IN SPIRAL BEVEL GEARS
    Simon, Vilmos V.
    DETC2009: PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES/COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2010, : 271 - 279
  • [40] Error tooth contact analysis of spiral bevel gears transmission
    Key Laboratory of Modern Complex Equipment Design and Extreme Manufacturing, Central South University, Changsha 410083, China
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2008, 44 (07): : 16 - 23
12345