Influence of Strain Rate on Heat Release under Quasi-Static Stretching of Metals. Experiment

被引：3

作者：

Zimin, B. A. ^{[1
]}

Sventitskaya, V. E. ^{[1
]}

Smirnov, I. V. ^{[1
]}

Sud'enkov, Yu. V. ^{[1
]}

机构：

[1] St Petersburg State Univ, St Petersburg 199034, Russia

来源：

PHYSICS OF THE SOLID STATE | 2018年 / 60卷 / 04期

基金：

俄罗斯基础研究基金会; 俄罗斯科学基金会;

关键词：

ENERGY;

D O I：

10.1134/S1063783418040352

中图分类号：

O469 [凝聚态物理学];

学科分类号：

070205 ;

摘要：

The paper presents the results of experimental studies of energy dissipation during a quasi-static stretching of metals and alloys at room temperature. The strain rates varied in the range of 10(-3)-10(-2) s(-1). Samples of M1 copper, AZ31B magnesium alloy, BT6 titanium, 12Cr18Ni10Ti steel, and D16AM aluminum alloy were analyzed. The experimental results demonstrated a significant dependence of the heat release on the strain rate in the absence of its influence on stress-strain diagrams for all the metals studied in this range of strain rates. The correlation of the changes in the character of heat release with the processes of structural transformations at various stages of plastic flow is shown on the qualitative level. A difference in the nature of the processes of heat release in materials with different ratios of the plasticity and strength is noted.

引用

页码：758 / 763

页数：6

共 50 条

[41] Strain rate effect on the fracture evolution of sandstones under quasi-static loading conditions: Insights from acoustic emission characteristics
Yuan, Guotao
Zhang, Mingwei
Zhang, Kai
Duan, Hongyue
Jia, Lei
Liu, Baolin
ENGINEERING FRACTURE MECHANICS, 2023, 290
[42] Strain rate sensitivity of autoclaved aerated concrete from quasi-static regime to shock loading
Mespoulet, Jerome
Plassard, Fabien
Hereil, Pierre Louis
DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 2015, 94
[43] Quasi-static loading strain rate effects on saturated limestone based on Brazilian splitting test
State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou
221116, China
Yantu Gongcheng Xuebao, 5 (802-811):
[44] THE ENERGY-RELEASE RATE IN QUASI-STATIC CRACK-PROPAGATION AND J-INTEGRAL
JARIC, JP
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1986, 22 (07) : 767 - 778
[45] Effect of thermomechanical processing on microstructural evolution and deformation behaviour of polycrystalline magnesium under quasi-static and high strain rate conditions
Mishra, Bidyapati
Kumar, D. Vijay
Pakhare, Chetan
Jonnalagadda, K. N.
Prasad, M. J. N. V.
PHILOSOPHICAL MAGAZINE, 2017, 97 (14) : 1071 - 1087
[46] Experimental investigation of the strain rate effect on crack initiation and crack damage thresholds of hard rock under quasi-static compression
Xu, Rongchao
Zhang, Shengzhe
Li, Zhen
Yan, Xinming
ACTA GEOTECHNICA, 2023, 18 (02) : 903 - 920
[47] Measurement of Pure Shear Constitutive Relationship From Torsion Tests Under Quasi-Static, Medium, and High Strain Rate Conditions
Zhang, Longhui
Townsend, David
Petrinic, Nik
Pellegrino, Antonio
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2021, 88 (12):
[48] Infrared thermographic assessment of heat release phenomena in steel parts subjected to quasi-static deformation
Moyseychik, E. A.
Vavilov, V. P.
Kuimova, M. V.
MEASUREMENT, 2021, 185
[49] Strain-Rate-Dependent Phase Transition Mechanism in Polybutene-1 during Uniaxial Stretching: From Quasi-Static to Dynamic Loading Conditions
Feng, Shengyao
Zhu, Jianhe
Yu, Wancheng
Guo, Hang
Chen, Wei
Lu, Ai
Li, Liangbin
MACROMOLECULES, 2022, 55 (06) : 2333 - 2344
[50] Approximations of the packet error rate under quasi-static fading in direct and relayed links
Ferrand, Paul
Gorce, Jean-Marie
Goursaud, Claire
EURASIP JOURNAL ON WIRELESS COMMUNICATIONS AND NETWORKING, 2015, : 1 - 12

← 1 2 3 4 5 →