Microstructure and tribological properties of Ti(Cr)SiCN coating deposited by plasma enhanced magnetron sputtering

被引：33
|
作者：
Li, Qiang [1 ]
Jiang, Fan-qing [1 ]
Leng, Yong-xiang [1 ]
Wei, Rong-hua [2 ]
Huang, Nan [1 ]
机构：
[1] SW Jiaotong Univ, Key Lab Adv Technol Mat, Minist Educ, Chengdu 610031, Sichuan, Peoples R China
[2] SW Res Inst, San Antonio, TX USA
来源：
VACUUM | 2013年 / 89卷
关键词：
TiSiCN; CrSiCN; TiCrSiCN; Microstructure; Wear; Ti6Al4V; TITANIUM-ALLOY; COATED-CARBIDE; FILMS; WEAR; MACHINABILITY; PERFORMANCE; EVOLUTION; SILICON; SCRATCH; TOOLS;
D O I：
10.1016/j.vacuum.2012.03.053
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Three kinds of hard coatings, TiSiCN, TiCrSiCN and CrSiCN were deposited on WC/Co alloys by plasma enhanced magnetron sputtering (PEMS) technique. Those coatings were comparatively studied with respect to their microstructure and mechanical properties. The sliding tribological behaviour of the coatings against Ti6Al4V counterpart was also studied by pin-on-disc tests. The results indicated that TIN and CrN were the main phase composition for the TiSiCN and CrSiCN coatings, respectively. While the TiCrSiCN coating consisted of TiCrN2 phases or Cr be incorporated in TIN as a single solid solution. The TiCrSiCN coating showed higher hardness than the CrSiCN coating, better adhesion with substrate than the TiSiCN coating, and higher dry sliding wear resistance against the Ti6Al4V counterpart than both TiSiCN and CrSiCN coatings. (C) 2012 Published by Elsevier Ltd.
引用
收藏
页码：168 / 173
页数：6
相关论文
共 50 条
  • [31] Microstructure and Mechanical Properties of CrN Films Deposited by Inductively Coupled Plasma Enhanced Radio Frequency Magnetron Sputtering
    刘峰
    孟月东
    任兆杏
    舒兴胜
    Plasma Science and Technology, 2008, (03) : 340 - 343
  • [32] Tribological properties of (Ti, Al)N films with different Al/Ti atomic ratios deposited by magnetron sputtering
    Liu, Xiansheng
    Li, Hongtao
    Zhang, Chao
    Jiang, Bailing
    Shi, Jing
    Chang, Shiye
    Zhu, Runkun
    MATERIALS RESEARCH EXPRESS, 2022, 9 (05)
  • [33] Microstructure and Tribological Behavior of Cr-Cu-N Coatings Deposited by Ion Beam Assisted Magnetron Sputtering
    Tian LinhaiZhang YangYang YaojunZhu XiaodongTang Bin Research Institute of Surface EngineeringTaiyuan University of TechnologyTaiyuan China State Key Laboratory for Mechanical Behaviour of MaterialsXian Jiaotong UniversityXian China
    稀有金属材料与工程, 2012, 41(S1) (S1) : 355 - 358
  • [34] Microstructure and mechanical properties of Ti-Si-C-N coatings deposited by hybrid arc enhanced magnetron sputtering
    Wu, G. Z.
    Ma, S. L.
    SURFACE ENGINEERING, 2010, 26 (1-2) : 50 - 54
  • [35] Microstructure and Tribological Behavior of Cr-Cu-N Coatings Deposited by Ion Beam Assisted Magnetron Sputtering
    Tian Linhai
    Zhang Yang
    Yang Yaojun
    Zhu Xiaodong
    Tang Bin
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 355 - 358
  • [36] Influence of Nitrogen on the Microstructure, Hardness, and Tribological Properties of Cr-Ni-B-C-N Films Deposited by DC Magnetron Sputtering
    Onoprienko, A. A.
    Ivashchenko, V. I.
    Scrynskyy, P. L.
    Sinelnichenko, A. K.
    Kozak, A. A.
    Kovalchenko, A. M.
    Olifan, E., I
    JOURNAL OF SUPERHARD MATERIALS, 2020, 42 (02) : 68 - 77
  • [37] Mechanical properties of (Ti,Cr)N coatings deposited by inductively coupled plasma assisted direct current magnetron sputtering
    Jung, DH
    Park, HS
    Na, HD
    Lim, JW
    Lee, JJ
    Joo, JH
    SURFACE & COATINGS TECHNOLOGY, 2003, 169 : 424 - 427
  • [38] Microstructure and mechanical properties of SiCN hard films deposited by an arc enhanced magnetic sputtering hybrid system
    Ma, Shengli
    Xu, Bin
    Wu, Guizhi
    Wang, Yanfeng
    Ma, Fei
    Ma, Dayan
    Xu, Kewei
    Bell, Tom
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (22-23): : 5379 - 5382
  • [39] Microstructure and Properties of Coating of FeAlCuCrCoMn High Entropy Alloy Deposited by Direct Current Magnetron Sputtering
    Li, Xiaochun
    Zheng, Zuoyun
    Dou, Dan
    Li, Jianchen
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2016, 19 (04): : 802 - 806
  • [40] Microstructure and tribological behavior of TiAlSiN coatings deposited by deep oscillation magnetron sputtering
    Ou, Y. X.
    Chen, H.
    Li, Z. Y.
    Lin, J.
    Pan, W.
    Lei, M. K.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2018, 101 (11) : 5166 - 5176
12345