Moving Discretised Control Set - Model Predictive Control for Dual-Active-Bridge

In many DC/DC converters applications, classical proportional-integral control is often considered. However, when complex converters structures, such as Dual Active Bridge converters, are considered, several challenges may be faced in the control design. In fact, achieving an accurate Dual Active Bridge model may be complex, considering that the small signal model of the circuit varies according with its operating mode. Moreover, Dual Active Bridge converters usually requires a robust control design, due to their high input/output voltage ratio and power level. In order to address these issues, a Moving Discretized Control Set - Model Predictive Control is introduced. The proposed control can achieve faster dynamics and stable operation throughout the power and terminal voltage ranges, considering global control parameters. It also presents a fixed switching frequency with low computational burden, due to the use of only two prediction horizons. Experiments on a 20kHz lkW Dual-Active-Bridge converter are carried out to verify the effectiveness of the proposed control technique.