Investigation and Application of Forced Cooling of WH 600MW Steam Turbine

被引：0

作者：

Shi, Yongfeng ^{[1
,2
]}

Xu, Jianqun ^{[1
]}

Ma, Lin

机构：

[1] Southeast Univ, Sch Energy & Environm, Key Lab Energy Thermal Convers & Control, Minist Educ, Nanjing 210096, Jiangsu, Peoples R China

[2] HuaDian Elect Res Inst, Hangzhou 310030, Zhejiang, Peoples R China

来源：

THERMAL, POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2 | 2013年 / 732-733卷

关键词：

Forced cooling; Natural cooling; Radiating mechanism; Control strategy;

D O I：

10.4028/www.scientific.net/AMR.732-733.242

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

With a long natural cooling time after a shutdown of steam turbine restricting its available coefficient, this paper presented the analysis and application of a forced cooling process to sub-critical steam turbine. The radiating mechanism of natural cooling was analyzed theoretically, and the required amount of cooling air was calculated for a WH 600MW steam turbine. Moreover, the cooling rate with no life loss principle was determined by the method of quantitative calculation and numerical analysis, together with safety analysis. The research discussed the control strategy of practical application according with steam turbine characteristic and applied to operation, which provided theoretical guidance for the optimization of cooling condition.

引用

页码：242 / +

页数：2

共 50 条

[31] Study on Control System of Turbine Speed of 600MW Ultra-Supercritical Unit
Ding, Daye
Yu, Shaojuan
Li, Chen
ELECTRICAL POWER & ENERGY SYSTEMS, PTS 1 AND 2, 2012, 516-517 : 660 - 664
[32] Experimental Investigation on Flow in Diffuser of 1090 MW Steam Turbine
Hoznedl, Michal
Sedlak, Kamil
Mrozek, Lukas
Bednar, Lukas
Kalista, Robert
APPLICATION OF EXPERIMENTAL AND NUMERICAL METHODS IN FLUID MECHANICS AND ENERGY 2016: XX ANNIVERSARY OF INTERNATIONAL SCIENTIFIC CONFERENCE, 2016, 1745
[33] Study on forced cooling technology of steam turbine after shut-down
Yu, Daren
Huang, Hongyan
Xu, Jiyu
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 1995, 15 (05): : 301 - 305
[34] Application of new techniques to renovation of 200 MW steam turbine
陈浮
宋彦萍
王仲奇
Journal of Harbin Institute of Technology, 2001, (04) : 344 - 347
[35] Temporary Pipeline System Arrangement and Process Control for 600MW Transformation Unit Steam Blowing
Zhang, Yong-xiang
Zhao, Zhen-ning
Zhang, Qing-feng
Wen, Zhi-qiang
Zhang, Xin
Li, Yuan-yuan
2016 INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING AND AUTOMATION (ICEEA 2016), 2016,
[36] Foundry processing design and manufacture for 600MW turbine high pressure stop valve casting
Zhao, Chengzhi
Chen, Huamin
Yin, Shibin
Teshugang/Special Steel, 1997, 18 (04): : 3 - 5
[37] Investigation of wet steam flow in a 300 MW direct air-cooling steam turbine. Part 2: flow field and windage
Cai, X.
Niu, F.
Li, J.
Su, M.
Ning, T.
Song, Y.
Wu, G.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2010, 224 (A1) : 129 - 137
[38] An investigation of wet steam flow in a 300 MW direct air-cooling steam turbine. Part 3: heterogeneous/homogeneous condensation
Cai, X.
Niu, F.
Ning, T.
Wu, G.
Song, Y.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2010, 224 (A4) : 583 - 589
[39] Investigation of metallic foam in the application of turbine cooling
Zhang, Hongjun
Zou, Zhengping
Qi, Lei
Liu, Huoxing
2011 CHINESE MATERIALS CONFERENCE, 2012, 27 : 752 - 761
[40] With ultrasound stages and innovative cooling system (ICS) for cooling steam at the 600 Mw oxyfuel Graz cycle unit
Jericha, Herbert
Sanz, Wolfgang
Göttlich, Emir
Neumayer, Fritz
VDI Berichte, 2008, (2051): : 215 - 228

← 1 2 3 4 5 →