A Finite Element Method for the Determination of Optimal Viscoelastic Material Properties from Indentation Tests of Polymer Film and Wire with Polymer Insulation

The time-dependent behavior of bulk polymer film and wire with polymer insulation is studied using indentation. The indenter is displaced into the material at a constant rate and then held at a fixed indentation depth to monitor load relaxation. A finite element simulation of the experiment is performed; this analysis is parameterized in terms of the unknown shear compliance modeled as a Prony series. An optimization method is then presented to determine the unknown material parameters by minimizing the RMS error between the model and the experimental data. The method is demonstrated with poly ( vinyl chloride) ( PVC) films after thermal aging and pristine polyethylene sheet; excellent agreement between the model and the data is demonstrated. The method is also demonstrated to successfully characterize the material properties for the compression of a wire with PVC insulation; the resulting properties are then shown to adequately predict the crossed-cylinder indentation behavior of the same wire using a 3D finite element model. The chief benefit of the method is that an analytical solution method is not required for its implementation; as such, the optimization approach can be readily applied to the determination of material properties from arbitrarily complex experimental geometries.