Investigating the use of wollastonite micro fiber in yielding SCC

被引:8
|
作者
Sharma, Shashi Kant [1 ]
Ransinchung, G. D. [2 ]
Kumar, Praveen [2 ]
机构
[1] NIT Jalandhar, Civil Engn Dept, Jalandhar 144011, Punjab, India
[2] Indian Inst Technol Roorkee, Civil Engn Dept, Roorkee 247667, Uttarakhand, India
关键词
self compacting concrete; wollastonite micro fiber; admixtures; compatibility; restrained shrinkage; SELF-COMPACTING CONCRETE; F FLY-ASH; MECHANICAL-PROPERTIES; SILICA FUME; GLASS;
D O I
10.12989/acc.2018.6.2.123
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Self compacting concrete (SCC) has good flowability, passability and segregation resistance because of voluminous cementitious material & high coarse aggregate to fine aggregate ratio, and high free water availability. But these factors make it highly susceptible to shrinkage. Fibers are known to reduce shrinkage in concrete mixes. Until now for conserving cement, only pozzolanic materials are admixed in concrete to yield a SCC. Hence, this study compares the use of wollastonite micro fiber (WMF), a cheap pozzolanic easily processed raw mineral fiber, and flyash in yielding economical SCC for rigid pavement. Microsilica was used as a complimentary material with both admixtures. Since WMF has large surface area (827 m(2)/kg), is acicular in nature; therefore its use in yielding SCC was dubious. Binary and ternary mixes were constituted for WMF and flyash, respectively. Paste mixes were tested for compatibility with superplasticizer and trials were performed on a normal concrete mix of flexural strength 4.5 MPa to yield SCC. Flexural strength test and restrained shrinkage test were performed on those mixes, which qualified self compacting criteria. Results revealed that WMF admixed pastes have high water demand, and comparable setting times to flyash mixes. Workability tests showed that 20% WMF with microsilica (57.5%) is efficient enough in achieving SCC and higher flexural strength than normal concrete at 90 days. Also, stress rate due to shrinkage was lesser and time duration for final strain was higher in WMF admixed SCC which encourages its use in yielding a SCC than pozzolanic materials.
引用
收藏
页码:123 / 143
页数:21
相关论文
共 50 条
  • [41] The use of quarry dust for SCC applications
    Ho, DWS
    Sheinn, AMM
    Ng, CC
    Tam, CT
    CEMENT AND CONCRETE RESEARCH, 2002, 32 (04) : 505 - 511
  • [42] Investigating the analytical and experimental performance of a pure torsional yielding damper
    Mahyari, Shahram Lotfi
    Riahi, Hossein Tajmir
    Hashemi, Mahmoud
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2019, 161 : 385 - 399
  • [43] The use of Wollastonite to enhance the mechanical properties of mortar mixes
    Wahab, Mona Abdel
    Latif, Ibrahim Abdel
    Kohail, Mohamed
    Almasry, Amira
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 152 : 304 - 309
  • [44] FRICTION STRESS AND INITIAL MICRO-YIELDING OF BERYLLIUM
    BONFIELD, W
    LI, CH
    ACTA METALLURGICA, 1965, 13 (03): : 317 - &
  • [45] ON THE DISCONTINUOUS YIELDING OF MICRO-GRAINED FCC POLYCRYSTALS
    KURZYDLOWSKI, KJ
    SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (02): : 283 - 286
  • [46] On the micro mechanics of yielding and hardening of crushable granular soils
    de Bono, John P.
    McDowell, Glenn R.
    COMPUTERS AND GEOTECHNICS, 2018, 97 : 167 - 188
  • [47] Impermeability durability of SCC reinforced with fibrillated polypropylene fiber
    He, X.B.
    Li, Y.
    Shen, Q.
    Open Civil Engineering Journal, 2015, 9 (01): : 159 - 166
  • [48] Investigating the material properties of hemp fiber and puffed rice for use in heritage conservation
    Abeer Dar Saleh
    Ahmed Agiel
    Maatouk Khoukhi
    Sabeera Haris
    Heritage Science, 11
  • [49] Investigating the material properties of hemp fiber and puffed rice for use in heritage conservation
    Saleh, Abeer Dar
    Agiel, Ahmed
    Khoukhi, Maatouk
    Haris, Sabeera
    HERITAGE SCIENCE, 2023, 11 (01)
  • [50] Micro-optical fiber probe for use in an intravascular Raman endoscope
    Komachi, Y
    Sato, H
    Aizawa, K
    Tashiro, H
    APPLIED OPTICS, 2005, 44 (22) : 4722 - 4732