Formation and Mechanical Properties of Bulk Glassy and Quasicrystalline Alloys in Zr-Al-Cu-Ti System

被引：0
|
作者：
Qiang, J. B. [1 ]
Zhang, W. [1 ]
Xie, G. Q. [1 ]
Inoue, A. [1 ]
机构：
[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 9808577, Japan
来源：
FRONTIERS IN MATERIALS RESEARCH | 2008年 / 10卷
关键词：
METALLIC GLASSES; SUPERCOOLED LIQUID; FORMING ABILITY; PHASE; STABILITY;
D O I：
暂无
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
The glass-forming, ability (GFA) of Zr(65)Al(7.5)Cu(27.5) alloy can be improved effectively by a certain amount of Ti addition. Bulk glassy samples of 3 nun in diameter were obtained in the compositions containing 3-7 at% Ti by copper mold casting, while further Ti additions will deteriorate GFA and lead to the formation of quasicrystals at (Zr(65)Al(7.5)Cu(27.5))(90)Ti(10). Meanwhile, the addition of Ti in the Zr(65)Al(7.5)Cu(27.5) alloy was found to alter the crystallization behavior of the metallic glasses; thus bulk quasicrystalline alloy can also be achieved by glass devitrification of Ti-containing BMGs. Room-temperature compression testing showed that; bulk quasicrystalline alloy, fabricated either by mold casting or by glass devitrification method, exhibited higher fracture strength and Young's modulus than that of the relative monolithic BMGs.
引用
收藏
页码：235 / 244
页数：10
相关论文
共 50 条
  • [31] Formation and Mechanical Properties of Zr-Nb-Cu-Ni-Al-Lu Bulk Glassy Alloys with Superior Glass-Forming Ability
    Zhao Xiangjin
    Liu Wei
    Liu Li
    Zhang Tao
    Pang Shujie
    Ma Chaoli
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2016, 31 (01): : 186 - 190
  • [32] Effects of additional noble elements on the thermal stability and mechanical properties of Cu-Zr-Al bulk glassy alloys
    Zhang, Wei
    Qin, Chunling
    Zhang, Xingguo
    Inoue, Akihisa
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 631 - 635
  • [33] MECHANICAL-PROPERTIES OF BULK-AMORPHIZED METALLIC ALLOYS OF THE TI-ZR-CU SYSTEM
    KOVNERISTYI, YK
    PASHKOVSKAYA, AG
    KUNAVIN, SA
    METAL SCIENCE AND HEAT TREATMENT, 1990, 32 (5-6) : 387 - 388
  • [34] Effects of Nb on the formation of icosahedral quasicrystalline phase in Ti-rich Ti-Zr-Ni-Cu-Be glassy forming alloys
    Mei, J. N.
    Li, J. S.
    Kou, H. C.
    Fu, H. Z.
    Zhou, L.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2008, 354 (28) : 3332 - 3335
  • [35] Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron
    Zadorozhnyy, V. Yu
    Inoue, A.
    Louzguine-Luzgin, D. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 472 - 477
  • [36] Synthesis and properties of amorphous and quasicrystalline Zr-Ti/Nb-Al-Cu-Ni alloys
    Eckert, J
    Kühn, U
    Wolff, U
    Gebert, A
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 103 - 106
  • [37] Glass formation and thermal stability of bulk glassy Cu-Zr-Ti-Sn-Si alloys
    Men, H
    Zhang, T
    MATERIALS TRANSACTIONS, 2005, 46 (07) : 1692 - 1694
  • [38] Icosahedral quasicrystalline phase formation in Zr-Al-Ni-Cu glassy alloys by the addition of V, Nb and Ta
    Saida, J
    Inoue, A
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2002, 312-14 : 502 - 507
  • [39] Bulk glass formation in the Zr-Ti-Al-Cu-Ni system
    Xing, LQ
    Ochin, P
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1997, 16 (15) : 1277 - 1280
  • [40] High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti-Be system
    Inoue, A
    Zhang, T
    Kurosaka, K
    Zhang, W
    MATERIALS TRANSACTIONS, 2001, 42 (08) : 1800 - 1804
12345