Formation and Mechanical Properties of Bulk Glassy and Quasicrystalline Alloys in Zr-Al-Cu-Ti System

被引：0
|
作者：
Qiang, J. B. [1 ]
Zhang, W. [1 ]
Xie, G. Q. [1 ]
Inoue, A. [1 ]
机构：
[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 9808577, Japan
来源：
FRONTIERS IN MATERIALS RESEARCH | 2008年 / 10卷
关键词：
METALLIC GLASSES; SUPERCOOLED LIQUID; FORMING ABILITY; PHASE; STABILITY;
D O I：
暂无
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
The glass-forming, ability (GFA) of Zr(65)Al(7.5)Cu(27.5) alloy can be improved effectively by a certain amount of Ti addition. Bulk glassy samples of 3 nun in diameter were obtained in the compositions containing 3-7 at% Ti by copper mold casting, while further Ti additions will deteriorate GFA and lead to the formation of quasicrystals at (Zr(65)Al(7.5)Cu(27.5))(90)Ti(10). Meanwhile, the addition of Ti in the Zr(65)Al(7.5)Cu(27.5) alloy was found to alter the crystallization behavior of the metallic glasses; thus bulk quasicrystalline alloy can also be achieved by glass devitrification of Ti-containing BMGs. Room-temperature compression testing showed that; bulk quasicrystalline alloy, fabricated either by mold casting or by glass devitrification method, exhibited higher fracture strength and Young's modulus than that of the relative monolithic BMGs.
引用
收藏
页码：235 / 244
页数：10
相关论文
共 50 条
  • [1] Formation and mechanical properties of Zr-Cu-Al bulk glassy alloys
    Yokoyama, Y
    Fukaura, K
    Inoue, A
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 : 427 - 431
  • [2] Formation, thermal stability and mechanical properties of Cu-Zr-Al bulk glassy alloys
    Inoue, A
    Zhang, W
    MATERIALS TRANSACTIONS, 2002, 43 (11) : 2921 - 2925
  • [3] Formation and mechanical strength of bulk glassy alloys in Zr-Al-Co-Cu system
    Zhang, T
    Inoue, A
    MATERIALS TRANSACTIONS, 2002, 43 (05) : 1250 - 1253
  • [4] Effect of yttrium addition on the formation and mechanical properties of Ti-Zr-Ni-Cu bulk quasicrystalline alloys
    Wang, Xinlu
    Zhang, Shanshan
    Wang, Lidong
    Liu, Wanqiang
    Wu, Yaoming
    Wang, Limin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 522 : 96 - 100
  • [5] Bulk glassy and quasicrystalline (Zr65Al7.5Cu27.5)100-xTix alloys and their mechanical properties
    Qiang, J. B.
    Zhang, W.
    Xie, G. Q.
    Inoue, A.
    MATERIALS TRANSACTIONS, 2007, 48 (07) : 1789 - 1792
  • [6] Formation and high mechanical strength of bulk glassy alloys in Zr-Al-Co-Cu system
    Wada, T
    Zhang, T
    Inoue, A
    MATERIALS TRANSACTIONS, 2003, 44 (09) : 1839 - 1844
  • [7] Formation and mechanical properties of Cu-Hf-Ti bulk glassy alloys
    Inoue, A
    Zhang, W
    Zhang, T
    Kurosaka, K
    JOURNAL OF MATERIALS RESEARCH, 2001, 16 (10) : 2836 - 2844
  • [8] Cu-based bulk glassy alloys with good mechanical properties in Cu-Zr-Hf-Ti system
    Inoue, A
    Zhang, W
    Zhang, T
    Kurosaka, K
    MATERIALS TRANSACTIONS, 2001, 42 (08) : 1805 - 1812
  • [9] Formation, thermal and mechanical properties of bulk glassy alloys in Zr-Al-Co and Zr-Al-Co-Cu systems
    Zhang, T
    Inoue, A
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 (1-2 SPEC. ISS.): : 432 - 435
  • [10] Thermal and mechanical properties of Cu-based Cu-Zr-Ti bulk glassy alloys
    Inoue, A
    Zhang, W
    Zhang, T
    Kurosaka, K
    MATERIALS TRANSACTIONS, 2001, 42 (06) : 1149 - 1151
12345