Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints

被引:100
|
作者
Tien-Cuong Nguyen [1 ]
Bai, Yu [1 ]
Zhao, Xiao-Ling [1 ]
Al-Mahaidi, Riadh [2 ]
机构
[1] Monash Univ, Dept Civil Engn, Clayton, Vic 3800, Australia
[2] Swinburne Univ Technol, Fac Engn & Ind Sci, Hawthorn, Vic 3122, Australia
基金
澳大利亚研究理事会;
关键词
CFRP; Steel; Double strap joint; Mechanical properties; Ultraviolet; Elevated temperatures; COOLED GFRP SLABS; COMPOSITES; LIGHT; CONSTRUCTION; DURABILITY; POLYESTER; ADHESIVE; BEHAVIOR; FIRE;
D O I
10.1016/j.compstruct.2012.05.036
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Although extensive studies of the bond between steel and CFRP under various environmental exposures have been carried out, the effects of UV have not been examined to date. This knowledge gap is addressed in this paper. Specimens (epoxy adhesive, CFRP laminates and steel/CFRP adhesively-bonded joints) were exposed to UV for various time periods and identical reference specimens were exposed to only thermal environments without UV. It was found that UV exposure does not influence the tensile strength of CFRP composites. The tensile strength of the adhesive reduced by 13.9% while modulus showed a significant increase by 105% after 744 h of exposure. The tensile modulus of adhesive exposed to only thermal environment also increased by 38%, considerably less than that induced by UV exposure. The UV exposure also led to a decrease in joint strength but an increase in stiffness, caused by the temperature effect rather than the UV rays. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3563 / 3573
页数:11
相关论文
共 50 条
  • [41] Influence of elevated temperatures on the bond performance of CFRP-steel lap joints bonded by nanosilica-modified adhesive with mixed curing agents
    Li, You
    Li, Hongyi
    Ma, Xiaowan
    Zheng, Hui
    Ou, Zhihua
    Li, Chuanxi
    Li, Zhaochao
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 426
  • [42] Investigating the Synergetic Effect of Ultraviolet Radiation and Elevated Temperature on Mechanical and Thermal Properties of Glass Fiber-Reinforced Plastic Pipes
    Al-Samhan, Meshal
    Samuel, Jacob
    Al-Attar, Fatema
    Al-Banna, A.
    Abraham, Gils
    JOURNAL OF PIPELINE SYSTEMS ENGINEERING AND PRACTICE, 2020, 11 (01)
  • [43] Characterization of Mechanical and Metallurgical Notch Effects of DP980 Steel Weld Joints in Fatigue Performance
    Park, Gitae
    Bae, Gyuyeol
    Lee, Changhee
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (03): : 1294 - 1307
  • [44] Characterization of Mechanical and Metallurgical Notch Effects of DP980 Steel Weld Joints in Fatigue Performance
    Gitae Park
    Gyuyeol Bae
    Changhee Lee
    Metallurgical and Materials Transactions A, 2019, 50 : 1294 - 1307
  • [45] Effects of Ultraviolet Radiation, High Temperature and Alkaline Chemicals on Ageing of Silicone Sealants Used in Ballastless Track Expansion Joints
    李化建
    YI Zhonglai
    CHENG Guanzhi
    WEN Hao
    XIE Yongjiang
    JournalofWuhanUniversityofTechnology(MaterialsScience), 2018, 33 (05) : 1015 - 1021
  • [46] Effects of Ultraviolet Radiation, High Temperature and Alkaline Chemicals on Ageing of Silicone Sealants Used in Ballastless Track Expansion Joints
    Li Huajian
    Yi Zhonglai
    Cheng Guanzhi
    Wen Hao
    Xie Yongjiang
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2018, 33 (05): : 1015 - 1021
  • [47] Effects of Ultraviolet Radiation, High Temperature and Alkaline Chemicals on Ageing of Silicone Sealants Used in Ballastless Track Expansion Joints
    Huajian Li
    Zhonglai Yi
    Guanzhi Cheng
    Hao Wen
    Yongjiang Xie
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2018, 33 : 1015 - 1021
  • [48] Improving mechanical performance of resistance spot welded joints of AISI 409M steel by double pulse current
    Subrammanian, A.
    Senthiil, P. V.
    Jabaraj, D. B.
    Devakumar, D.
    MATERIALS TODAY-PROCEEDINGS, 2019, 16 : 949 - 955
  • [49] Thermo-mechanical performance of Carbon Fiber Reinforced Polymer (CFRP), with and without fire protection material, under combined elevated temperature and mechanical loading conditions
    Phi Long Nguyen
    Xuan Hong Vu
    Ferrier, Emmanuel
    COMPOSITES PART B-ENGINEERING, 2019, 169 : 164 - 173
  • [50] Brazing temperature and time effects on the mechanical properties of TiC cermet/Ag-Cu-Zn/steel joints
    Zhang, L. X.
    Feng, J. C.
    He, P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 428 (1-2): : 24 - 33