Wear behavior of plasma nitrided AISI 420 stainless steel

被引：20
|
作者：
Bruehl, Sonia P. [1 ]
Charadia, Raul [1 ]
Sanchez, Carlos [2 ]
Staia, Mariana H. [2 ]
机构：
[1] Univ Tecnol Nacl, Fac Reg Concepcion Uruguay, Surface Engn Grp, Concepcion Del Uruguay, Argentina
[2] Cent Univ Venezuela, Fac Ingn, CENMACOR, Caracas, Venezuela
来源：
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2008年 / 99卷 / 07期
关键词：
plasma nitriding; adhesive wear; martensitic stainless steel; ball-on-disk;
D O I：
10.3139/146.101692
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Martensitic AISI420 stainless steel was plasma nitrided using a DC N2-Hz pulsed discharge, after thermal treatment at two different tempering temperatures. Sliding wear behavior was determined by means of a ball-on-disk tribometer at room temperature and without lubrication. Wear volume was calculated from the information provided by an optical profilometer and wear scars were analyzed by Scanning Electron Microscopy. The results indicated that the nitrided samples exhibited improved wear resistance when compared to the untreated specimens, but corrosion resistance was diminished due to the presence of the outer nitrided layer. However, when this layer was removed mechanically considerable improvement in the corrosion resistance was achieved without impairing the wear resistance of the whole system, which was 200 % higher compared to the wear resistance of the non-nitrided specimens.
引用
收藏
页码：779 / 786
页数：8
相关论文
共 50 条
  • [41] Wear properties of induction hardened, conventional plasma nitrided and pulse plasma nitrided AISI 4140 steel in dry sliding conditions
    Podgornik, B
    Vizintin, J
    Leskovsek, V
    WEAR, 1999, 232 (02) : 231 - 242
  • [42] Wear properties of induction hardened, conventional plasma nitrided and pulse plasma nitrided AISI 4140 steel in dry sliding conditions
    Ctr. Tribol. and Tech. Diagnostics, Univ. Ljubljana, Bogisiceva 8, S., Ljubljana, Slovenia
    不详
    Wear, 2 (231-242):
  • [43] COMPARISON OF BEHAVIOUR WEAR OF NITRIDED AND INDUCTION HARDENED NITRIDED AISI 1045 STEEL
    Schierloh, Gonzalo J.
    Regis, Matias
    Charadia, Raul
    Dalibon, Eugenia L.
    Bruhl, Sonia P.
    AVANCES EN CIENCIAS E INGENIERIA, 2016, 7 (04): : 1 - 8
  • [44] Chromizing of plasma nitrided AISI 1045 steel
    Hakami, F.
    Sohi, M. Heydarzadeh
    Ghani, J. Rasizadeh
    Ebrahimi, M.
    THIN SOLID FILMS, 2011, 519 (20) : 6783 - 6786
  • [45] The effect of gas mixture of post-oxidation on structure and corrosion behavior of plasma nitrided AISI 316 stainless steel
    Karimzadeh, N.
    Moghaddam, E. G.
    Mirjani, M.
    Raeissi, K.
    APPLIED SURFACE SCIENCE, 2013, 283 : 584 - 589
  • [46] WEAR BEHAVIOR OF AISI 316 STAINLESS STEEL MACHINED BY FIBER LASER
    Kasman, S.
    Saklakoglu, I. E.
    BALTTRIB' 2009: V INTERNATIONAL CONFERENCE, PROCEEDINGS, 2009, : 293 - +
  • [47] On the Microstructure and Corrosion Behavior of Wire Arc Additively Manufactured AISI 420 Stainless Steel
    Kazemipour, Mostafa
    Lunde, Jonas Halvorsen
    Salahi, Salar
    Nasiri, Ali
    TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2020, : 435 - 448
  • [48] Slurry and liquid impingement erosion behavior of low-temperature plasma carburized AISI 420 martensitic stainless steel
    Mainardia, V. A.
    Cardoso, R. P.
    Brunattob, S. F.
    Scheuer, C. J.
    SURFACE & COATINGS TECHNOLOGY, 2024, 477
  • [49] MAPPING WEAR BEHAVIOR OF NITRIDED STEEL
    KATO, H
    EYRE, TS
    RALPH, B
    MATERIALS WORLD, 1994, 2 (07) : 365 - 368
  • [50] The effect of hydrogen on the growth of the nitrided layer in r.f.-plasma-nitrided austenitic stainless steel AISI 316
    Kumar, S
    Baldwin, MJ
    Fewell, MP
    Haydon, SC
    Short, KT
    Collins, GA
    Tendys, J
    SURFACE & COATINGS TECHNOLOGY, 2000, 123 (01): : 29 - 35
12345