A 1-V 5 μW CMOS-opamp with bulk-driven input transistors

被引:0
|
作者
Lasanen, K [1 ]
Räisänen-Ruotsalainen, E [1 ]
Kostamovaara, J [1 ]
机构
[1] Univ Oulu, Dept Elect Engn, FIN-90014 Oulu, Finland
关键词
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In this paper, a low-power CMOS operational amplifier for biomedical instrumentation operating with a 1-V supply is described. Large input common-mode range (CMR) is achieved utilizing bulk-driven PMOS-transistors as an input differential pair of the opamp. The opamp was fabricated in a 0-35-mum n-well double-poly CMOS process with threshold voltages of 0.5 V and 0.65 V. The open-loop gain (A(0)) of the amplifier is 70 dB, the gain-bandwidth product (GBW) is 190 kHz and the phase margin (PM) is 60 degrees with a 7 pF load. The power consumption of the opamp is 5 muW.
引用
收藏
页码:1038 / 1041
页数:4
相关论文
共 50 条
  • [21] A new bulk-driven input stage design for sub 1-volt CMOS op-amps
    Haga, Yasutaka
    Morling, Richard C. S.
    Kale, Izzet
    2006 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1-11, PROCEEDINGS, 2006, : 1547 - 1550
  • [22] A NEW RAIL-TO-RAIL OPAMP WITH BULK-DRIVEN INPUT STAGE AND INTERLEAVED CLASS-AB OUPUT STAGE
    Ma Jianping
    Yuan Chen
    Tian Tong
    2014 12TH IEEE INTERNATIONAL CONFERENCE ON SOLID-STATE AND INTEGRATED CIRCUIT TECHNOLOGY (ICSICT), 2014,
  • [23] 0.6-V CMOS bulk-driven instrumentation amplifier for IoMT bioimpedance analysis
    Carrillo, Juan M.
    Ocampo-Hidalgo, Juan J.
    Corbacho, Israel
    de la Cruz-blas, Carlos A.
    Dominguez, Miguel a.
    INTERNATIONAL JOURNAL OF CIRCUIT THEORY AND APPLICATIONS, 2024, 52 (10) : 4970 - 4984
  • [24] 0.5 V bulk-driven CMOS fully differential current feedback operational amplifier
    Kumngern, Montree
    Khateb, Fabian
    Kulej, Tomasz
    IET CIRCUITS DEVICES & SYSTEMS, 2019, 13 (03) : 314 - 320
  • [25] 0.35 V Subthreshold Bulk-Driven CMOS Second-Generation Current Conveyor
    Shah, Muhammad Omer
    Caruso, Manfredi
    Pennisi, Salvatore
    JOURNAL OF LOW POWER ELECTRONICS AND APPLICATIONS, 2024, 14 (03)
  • [26] A 1-v 3.5-mW CMOS switched-opamp quadrature IF circuitry for Bluetooth receivers
    Cheung, VSL
    Luong, HC
    Ki, WH
    2002 SYMPOSIUM ON VLSI CIRCUITS, DIGEST OF TECHNICAL PAPERS, 2002, : 140 - 143
  • [27] A 0.6-V, 0.4-µW bulk-driven operational amplifier with rail-to-rail input/output swing
    Meysam Akbari
    Omid Hashemipour
    Analog Integrated Circuits and Signal Processing, 2016, 86 : 341 - 351
  • [28] A 0.6-V, 0.4-AμW bulk-driven operational amplifier with rail-to-rail input/output swing
    Akbari, Meysam
    Hashemipour, Omid
    ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2016, 86 (02) : 341 - 351
  • [29] A 1-v 3.5-mw CMOS switched-opamp quadrature IF circuitry for Bluetooth receivers
    Cheung, VSL
    Luong, HC
    Chan, M
    Ki, WH
    IEEE JOURNAL OF SOLID-STATE CIRCUITS, 2003, 38 (05) : 805 - 816
  • [30] A new linearization technique for a CMOS differential amplifier using bulk-driven weak inversion MOS transistors
    Popa, C
    Coada, D
    SCS 2003: INTERNATIONAL SYMPOSIUM ON SIGNALS, CIRCUITS AND SYSTEMS, VOLS 1 AND 2, PROCEEDINGS, 2003, : 589 - 592