Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of Fe-Mn-Al alloy

被引：26
|
作者：
Guu, YH [1 ]
Chou, CY [1 ]
Chiou, ST [1 ]
机构：
[1] Natl United Univ, Dept Mech Engn, Miaoli 360, Taiwan
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2005年 / 20卷 / 06期
关键词：
electrical discharge machining; electrode wear ratio; Fe-Mn-Al alloy; material removal rate; recast layer; surface morphology; surface roughness;
D O I：
10.1081/AMP-200060412
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work we investigated the electrical discharge machining (EDM) of a Fe-Mn-Al alloy. The surface phenomena caused by EDM were studied in terms of machining parameters. An empirical model of the Fe-Mn-Al alloy was also proposed based on the experimental data. Experimental results indicate that the higher the discharge energy, the faster the machining time. This treatment introduces machining damage in the resolidified surface layer and worsens the surface roughness. The optimum pulse-on duration on the basis of the electrode wear ratio for the copper electrode was about 200 mu s. The increase of crater depth with the applied pulsed current and pulse-on duration appears minimal under a small input energy.
引用
收藏
页码：905 / 916
页数：12
相关论文
共 50 条
  • [31] Electrical discharge machining (EDM) characteristics associated with electrical discharge energy on machining of cemented tungsten carbide
    Lin, Yan-Cherng
    Chen, Yuan-Feng
    Lin, Ching-Tien
    Tzeng, Hsinn-Jyh
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (3-4) : 391 - 399
  • [32] Electrical discharge machining of 6061 aluminium alloy
    Pramanik, A.
    Basak, A. K.
    Islam, M. N.
    Littlefair, G.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (09) : 2866 - 2874
  • [33] Surface modification of Al-Zn-Mg alloy by combined electrical discharge machining with ball burnish machining
    Yan, BH
    Lin, YC
    Huang, FY
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (08): : 925 - 934
  • [34] ELECTRICAL DISCHARGE MACHINING
    KHOL, R
    MACHINE DESIGN, 1971, 43 (27) : 132 - &
  • [35] Electrical discharge machining
    Masuzawa, Takahisa
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2009, 75 (01): : 68 - 69
  • [36] Study on Effect of Machining Parameters on Performance Characteristics of Ni-rich NiTi Shape Memory Alloy during Wire Electric Discharge Machining
    Bisaria, Himanshu
    Shandilya, Pragya
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 3316 - 3324
  • [37] ELECTRICAL DISCHARGE MACHINING
    不详
    MACHINE TOOL REVIEW, 1970, 58 (343): : 9 - &
  • [38] Electrical discharge machining of Al (6351) alloy: role of electrode shape
    Kumar, S. Suresh
    Uthayakumar, M.
    Kumaran, S. Thirumalai
    Parameswaran, P.
    Mohandas, E.
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2016, 53 (01): : 86 - 97
  • [39] Investigation on the effect of process parameters in micro electrical discharge machining
    Siva, M.
    Parivallal, M.
    Kumar, M. Pradeep
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 1829 - 1836
  • [40] Optimization of Wire Electric Discharge Machining Parameters in Machining of Ti-6Al-4V Alloy
    Sneha, P.
    Mahamani, A.
    Kakaravada, Ismail
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6722 - 6727
12345