On the elastic modulus and hardness of co-sputtered Zr-Cu-(N) thin metal glass films

被引：32

作者：

Coddet, P. ^{[1
]}

Sanchette, F. ^{[1
]}

Rousset, J. C. ^{[2
]}

Rapaud, O. ^{[1
]}

Coddet, C. ^{[1
]}

机构：

[1] LERMPS UTBM, F-90010 Belfort, France

[2] TAG HEUER, CH-2300 La Chaux De Fonds, Switzerland

来源：

SURFACE & COATINGS TECHNOLOGY | 2012年 / 206卷 / 17期

关键词：

Thin Film Metallic Glasses (TFMG); Amorphous alloys; Co-sputtering; Hardness; Young's modulus; Nanoindentation; ZR-NI; CU;

D O I：

10.1016/j.surfcoat.2012.02.036

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This work focuses on the properties of Zr-Cu-(N) deposits obtained by magnetron co-sputtering of Zr and Cu targets in pure argon or in argon nitrogen gas mixtures. Microstructure and mechanical properties (hardness and Young's modulus) were investigated versus deposition parameters. The composition of the Zr-Cu alloy films on the full binary range was accurately controlled by means of the discharge current intensity on both Zr and Cu targets. Deposits were observed to be amorphous single phased in a large range of copper content, the hardness and Young's modulus of the amorphous phase increasing with the latter. A small amount of nitrogen in the gas mixture leads to higher hardness and Young's modulus values. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：3567 / 3571

页数：5

共 50 条

[1] On the amorphous and nanocrystalline Zr-Cu and Zr-Ti co-sputtered thin films
Chen, C. J.
Huang, J. C.
Chou, H. S.
Lai, Y. H.
Chang, L. W.
Du, X. H.
Chu, J. P.
Nieh, T. G.
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 483 (1-2) : 337 - 340
[2] Correlation of elastic modulus, hardness and density for sputtered TiAlBN thin films
Rebholz, C.
Leyland, A.
Matthews, A.
Charitidis, C.
Logothetidis, S.
Schneider, D.
THIN SOLID FILMS, 2006, 514 (1-2) : 81 - 86
[3] Heterogeneous Morphologies and Hardness of Co-Sputtered Thin Films of Concentrated Cu-Mo-W Alloys
Wissuchek, Forrest
Derby, Benjamin K.
Misra, Amit
NANOMATERIALS, 2024, 14 (18)
[4] Cathodic behavior of co-sputtered Cu/V oxides thin films
Souza, E. A.
Landers, R.
Tabacniks, M. H.
Cardoso, L. P.
Gorenstein, A.
ELECTROCHIMICA ACTA, 2006, 51 (26) : 5885 - 5891
[5] Investigation of structural and optical properties of ZnO:Cu co-sputtered thin films
Khosravi, P.
Karimzadeh, F.
Salimijazi, H. R.
MATERIALS RESEARCH EXPRESS, 2019, 6 (11):
[6] Characterization of Cu2ZnSnS4 Thin Films Prepared by the Sulfurization of Co-sputtered Metal Precursors
Abusnina, Mohamed
Matin, Mohammad
Moutinho, Helio
Al-Jassim, Mowafak
THIN FILMS FOR SOLAR AND ENERGY TECHNOLOGY VII, 2015, 9561
[7] SELENIZATION OF CO-SPUTTERED CU-IN ALLOY FILMS
Volobujeva, O.
Abou-Ras, D.
Grossberg, M.
Raudoja, J.
Mellikov, E.
Traksmaa, R.
PVSC: 2008 33RD IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, VOLS 1-4, 2008, : 794 - +
[8] Preparation of CuInSe2 thin films by selenization of co-sputtered Cu–In precursors
F. O. Adurodija
J. Song
K. H. Yoon
S. K. Kim
S. D. Kim
S. H. Kwon
B. T. Ahn
Journal of Materials Science: Materials in Electronics, 1998, 9 : 361 - 366
[9] Evaluation of elastic modulus and hardness of thin films by nanoindentation
Yeon-Gil Jung
Brian R. Lawn
Mariusz Martyniuk
Han Huang
Xiao Zhi Hu
Journal of Materials Research, 2004, 19 : 3076 - 3080
[10] Evaluation of elastic modulus and hardness of thin films by nanoindentation
Jung, YG
Lawn, BR
Martyniuk, M
Huang, H
Hu, XZ
JOURNAL OF MATERIALS RESEARCH, 2004, 19 (10) : 3076 - 3080

← 1 2 3 4 5 →