Micro-Brazing of Stainless Steel Using Ni-P Alloy Plating

被引：7
|
作者：
Liu, Shubin [1 ]
Shohji, Ikuo [1 ]
Iioka, Makoto [2 ]
Hashimoto, Anna [2 ]
Hirohashi, Junichiro [3 ]
Wake, Tsunehito [3 ]
Arai, Susumu [4 ]
机构：
[1] Gunma Univ, Grad Sch Sci & Technol, 1-5-1 Tenjin Cho, Kiryu, Gunma 3768515, Japan
[2] Gunma Univ, Fac Sci & Technol, 1-5-1 Tenjin Cho, Kiryu, Gunma 3768515, Japan
[3] Waki Factory Inc, 6-760 Higashi Sayamagaoka, Tokorozawa, Saitama 3591106, Japan
[4] Shinshu Univ, Fac Engn, 4-17-1 Wakasato, Nagano, Nagano 3808553, Japan
来源：
APPLIED SCIENCES-BASEL | 2019年 / 9卷 / 06期
基金：
日本科学技术振兴机构;
关键词：
electroplating; Ni-11; wt; % P layer; filler metal; microstructure; shear strength; NICKEL; ELECTRODEPOSITION; COMPOSITE;
D O I：
10.3390/app9061094
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
A Ni-P plated layer of 20 m thickness containing 11 wt.% P was formed on the surface of a stainless steel (SUS304) plate by electroplating. The microstructure and joint strength of the brazed joint with the electroplated Ni-11P layer were investigated. The results indicated that the filler metal was homogeneously distributed between the SUS304 plates and no voids or flaws formed in the brazed filler zone. Fe-Ni-Cr solid solutions were formed at the brazed interface. Moreover, P was mainly concentrated in such brazed filler zone to form P-containing phases. The average shear strength of the brazed joints was determined to be 47.3 MPa. The results demonstrated that the brazing of SUS304 plates using the electroplated Ni-11P layer as the filler metal was successfully realized.
引用
收藏
页数：9
相关论文
共 50 条
  • [41] Wear and Corrosion Resistance of Electroless Plating Ni-P Coating on P110 Steel
    林乃明
    ZHOU Peng
    ZOU Jiaojuan
    XIE Faqin
    TANG Bin
    Journal of Wuhan University of Technology(Materials Science), 2015, (03) : 622 - 625
  • [42] A Electroless plating of Ni-P on the Metalized Ceramics
    Nanjing Electronic Devices Institute Li Qinzhong Shi Dequan
    材料保护, 1992, (07) : 4 - 7
  • [43] Wetting of copper by Ni-P based brazing alloys
    Sebo, P
    Duhaj, P
    KOVOVE MATERIALY-METALLIC MATERIALS, 1996, 34 (04): : 249 - 259
  • [44] Electroless Ni-P plating with molybdate pretreatment on Mg-8Li alloy
    Yang, Lihui
    Li, Junqing
    Zheng, Yanzhen
    Jiang, Weiwei
    Zhang, Milin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 467 (1-2) : 562 - 566
  • [45] Microstructure and properties of mechanical attrition enhanced electroless Ni-P plating on magnesium alloy
    He, Y. D.
    Fu, H. F.
    Li, X. G.
    Gao, W.
    SCRIPTA MATERIALIA, 2008, 58 (06) : 504 - 507
  • [46] Mechanical assisted electroless barrel-plating Ni-P coatings on magnesium alloy
    Ping, Zhaoxia
    Yuan, Juntao
    He, Yedong
    Li, Xiaogang
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2009, 22 (03) : 225 - 232
  • [47] Mechanical assisted electroless barrel-plating Ni-P coatings on magnesium alloy
    Zhaoxia PING
    Acta Metallurgica Sinica(English Letters), 2009, 22 (03) : 225 - 232
  • [48] Direct electroless Ni-P plating on AZ91D magnesium alloy
    李忠厚
    渠毓萍
    郑峰
    戴阿赶
    TransactionsofNonferrousMetalsSocietyofChina, 2006, (S3) : 1823 - 1826
  • [49] Electroless Ni-P plating on Mg-10Li-1Zn alloy
    Zhang, Hua
    Wang, Shulan
    Yao, Guangchun
    Hua, Zhongsheng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 474 (1-2) : 306 - 310
  • [50] Study on electroless plating Ni-P alloy surface stabilizing agent of cast iron
    School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China
    不详
    Zhuzao Jishu, 2006, 4 (330-332):
12345