Theoretical comparison of performance using transfer functions for reactivity meters based on inverse kinetic method and simple feedback method

被引：5

作者：

Shimazu, Yoichiro ^{[1
]}

Tashiro, Shoichi ^{[2
]}

Tojo, Masayuki ^{[2
]}

机构：

[1] Univ Fukui, Res Inst Nucl Engn, Dept Nucl Reactor Phys, Tsuruga, Fukui, Japan

[2] Global Nucl Fuel Japan, Core Design Grp, Yokosuka, Kanagawa, Japan

来源：

JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY | 2017年 / 54卷 / 04期

关键词：

Reactivity; nuclear criticality safety; sub-criticality; reactivity estimation; inverse point kinetic equation; noise filtering; CRITICALITY APPROACH;

D O I：

10.1080/00223131.2017.1286270

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

The performance of two digital reactivity meters, one based on the conventional inverse kinetic method and the other one based on simple feedback theory, are compared analytically using their respective transfer functions. The latter one is proposed by one of the authors. It has been shown that the performance of the two reactivity meters become almost identical when proper system parameters are selected for each reactivity meter. A new correlation between the system parameters of the two reactivity meters is found. With this correlation, filter designers can easily determine the system parameters for the respective reactivity meters to obtain identical performance.

引用

页码：481 / 489

页数：9

共 48 条

[41] Investigation of thermal flow structure and performance heat transfer in three-dimensional circular pipe using twisted tape based on Taguchi method analysis
Al-Obaidi, Ahmed Ramadhan
HEAT TRANSFER, 2022, 51 (02) : 1649 - 1667
[42] Analysis the performance of Energy Transfer System (ETS) for EV battery charging method using non -isolated SEPIC converter-based CCCV control
Sivakumar, N.
Raja, S. Charles
Saravanan, M.
Xavier, Arockia Edwin
2023 9TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENERGY SYSTEMS, ICEES, 2023, : 377 - 381
[43] Improved energy performance evaluating and ranking approach for office buildings using Simple-normalization, Entropy-based TOPSIS and K-means method
Sun, Fukang
Yu, Junqi
ENERGY REPORTS, 2021, 7 : 1560 - 1570
[44] Torque Density Comparison between Axial-Gap Motors and Radial-Gap Motors Using Simple High-Torque Design Based on Permeance Method
Hattori, Akihisa
Noguchi, Toshihiko
2021 24TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2021), 2021, : 404 - 409
[45] Modelling of radiative transfer by the Monte Carlo method and solving the inverse problem based on a genetic algorithm according to experimental results of aerosol sensing on short paths using a femtosecond laser source
Matvienko, G. G.
Oshlakov, V. K.
Stepanov, A. N.
Sukhanov, A. Ya.
QUANTUM ELECTRONICS, 2015, 45 (02) : 145 - 152
[46] A new performance-based seismic design method using endurance time analysis for linked column frame system and a comparison of structural systems and seismic analysis methods
Jaberi, Vahid
Jaberi, Masume
Asghari, Abazar
STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 2024, 33 (10):
[47] Test performance comparison of inform HPV and hybrid capture 2 high-risk HPV DNA tests using the SurePath liquid-based pap test as the collection method
Davis-Devine, S
Day, SJ
Freund, GG
AMERICAN JOURNAL OF CLINICAL PATHOLOGY, 2005, 124 (01) : 24 - 30
[48] Glass-crystal transformation under non-isothermal conditions: Kinetic analysis of the Ag0.16M0.38Se0.46 glassy alloy by using a new theoretical method based on nucleation and growth processes, which depend on time as a power law
Vazquez, J.
Cardenas-Leal, J. L.
Garcia-G. Barreda, D.
Gonzalez-Palma, R.
Lopez-Alemany, P. L.
Villares, P.
PHYSICA B-CONDENSED MATTER, 2010, 405 (21) : 4462 - 4469

← 1 2 3 4 5 →