Influence of the FDM Parameters and Conditions on the Properties of Products

被引：1
|
作者：
Myshechkin, A. A. [1 ]
Lut'yanov, A. V. [1 ]
Kravchenko, I. N. [1 ,2 ]
Belousov, I. V. [1 ]
Lim, A. A. [1 ]
Shumilo, E. A. [1 ]
机构：
[1] Russian Technol Univ MIREA, Moscow 119571, Russia
[2] Russian Acad Sci, Mech Engn Res Inst, Moscow 101990, Russia
来源：
RUSSIAN METALLURGY | 2022年 / 2022卷 / 13期
关键词：
layer-by-layer deposition technology; additive technologies; FDM technology; material; ABS plastic; PLA plastic; laying direction; printing regime; ultimate tensile strength; ductility; elongation;
D O I：
10.1134/S0036029522130237
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The results of studying the technology of layer-by-layer deposition of products made of ABS and PLA plastics are presented. The influence of various technological parameters (type of application of layers, direction of laying and thickness of threads, printing speed) on the mechanical characteristics of products (strength, plasticity, anisotropy of properties) and the material (specimen) density is studied. Recommendations on the development of this process are given.
引用
收藏
页码：1740 / 1743
页数：4
相关论文
共 50 条
  • [21] Mechanical property of FDM printed ABS: influence of printing parameters
    M. Samykano
    S. K. Selvamani
    K. Kadirgama
    W. K. Ngui
    G. Kanagaraj
    K. Sudhakar
    The International Journal of Advanced Manufacturing Technology, 2019, 102 : 2779 - 2796
  • [22] FDM 3D-PRINTED THERMOPLASTIC ELASTOMERS: EXPERIMENTS, MODELING, AND INFLUENCE OF PROCESS PARAMETERS ON PROPERTIES
    Hripko, Brad
    Hoover, Luke
    Damodara, Priyadarsini
    Reissman, Timothy
    Lowe, Robert
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 2A, 2019,
  • [23] The influence of printing parameters on selected mechanical properties of FDM/FFF 3D-printed parts
    Cwikla, G.
    Grabowik, C.
    Kalinowski, K.
    Paprocka, I.
    Ociepka, P.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING V, 2017, 227
  • [24] Study of Anisotropic Properties of Polymer Products Manufactured by FDM Technology
    Stenko, D. V.
    Khapov, A. A.
    Kapranova, A. B.
    Badaeva, N. V.
    Novikov, E. R.
    THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING, 2024, 58 (04) : 1459 - 1462
  • [25] Manufacturing parameter influence on FDM polypropylene tensile properties
    Aleksa Milovanović
    Zorana Golubović
    Snežana Kirin
    Tomáš Babinský
    Ivo Šulák
    Miloš Milošević
    Aleksandar Sedmak
    Journal of Mechanical Science and Technology, 2023, 37 : 5541 - 5547
  • [26] Manufacturing parameter influence on FDM polypropylene tensile properties
    Milovanovic, Aleksa
    Golubovic, Zorana
    Kirin, Snezana
    Babinsky, Tomas
    Sulak, Ivo
    Milosevic, Milos
    Sedmak, Aleksandar
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2023, 37 (11) : 5541 - 5547
  • [27] Effect of manufacturing parameters on tensile properties of FDM printed specimens
    Valean, Cristina
    Marsavina, Liviu
    Marghitas, Mihai
    Linul, Emanoil
    Razavi, Nima
    Berto, Filippo
    1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1), 2020, 26 : 313 - 320
  • [28] Effects of FDM parameters and annealing on the mechanical and tribological properties of PEEK
    He, Yang
    Shen, Mei
    Wang, Qihua
    Wang, Tingmei
    Pei, Xianqiang
    COMPOSITE STRUCTURES, 2023, 313
  • [29] Exploring the synergistic influence of FDM parameters and strain rate on tensile strength and failure mechanism of FDM printed PLA
    Balasubramanian, Muthuselvan
    Saravanan, R.
    Yang, Yo-Lun
    Sathish, T.
    Shanmugam, Vigneshwaran
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (04) : 2765 - 2774
  • [30] Processing Parameters, Heat-Treatment, and Testing Speed influence on Tensile properties of ABS-FDM materials
    Ouazzani, Khaoula
    Akhrif, Iatimad
    Rihani, Nadir
    El Jai, Mostapha
    Radouani, Mohammed
    El Fahime, Benaissa
    MOROCCAN JOURNAL OF CHEMISTRY, 2024, 12 (04):
12345