Noise reduction combining microphones and piezoelectric devices

This paper describes noise reduction combining microphones and piezoelectric devices. The conventional microphone array has widely been utilized to realize a noise reduction and Direction of Arrival (DOA) estimation system. However, when the microphones are mounted to robot systems, the microphones are set extremely close to the robot Then, the problem of internal noise from robots such as motors and gears arises. It is difficult to reduce the internal noise utilizing the conventional microphone array because the noise source is extremely close to the microphones. As the internal noise is not always stationary or sparse, we also can not employ useful blind source separation (BSS) approaches such as Independent Component Analysis (ICA) and sparseness approach. The aim of our research is to reduce the internal noise by utilizing the piezoelectric devices attached on the internal noise source. In this paper, we formulate the problem combining microphones and the piezoelectric devices and describe the proposed algorithm for noise reduction. Experimental results show that our proposed method can reduce the internal noise.