Initiated Chemical Vapor Deposition (iCVD) of Bio-Based Poly(tulipalin A) Coatings: Structure and Material Properties

A solvent-free route of initiated chemical vapor deposition (iCVD) was used to synthesize a bio-renewable poly(alpha-Methylene-gamma-butyrolactone) (PMBL) polymer. alpha-MBL, also known as tulipalin A, is a bio-based monomer that can be a sustainable alternative to produce polymer coatings with interesting material properties. The produced polymers were deposited as thin films on three different types of substrates-polycarbonate (PC) sheets, microscopic glass, and silicon wafers-and characterized via an array of characterization techniques, including Fourier-transform infrared (FTIR), proton nuclear magnetic resonance spectroscopy (H-1 NMR), ultraviolet visible spectroscopy (UV-vis), differential scanning calorimetry (DSC), size-exclusion chromatography (SEC), and thermogravimetric analysis (TGA). Optically transparent thin films and coatings of PMBL were found to have high thermal stability up to 310 degrees C. The resulting PMBL films also displayed good optical characteristics, and a high glass transition temperature (T-g similar to 164 degrees C), higher than the T-g of its structurally resembling fossil-based linear analogue-poly(methyl methacrylate). The effect of monomer partial pressure to monomer saturation vapor pressure (P-m/P-sat) on the deposition rate was investigated in this study. Both the deposition rate and molar masses increased linearly with Pm/Psat following the normal iCVD mechanism and kinetics that have been reported in literature.