The effect of cutting force and tool wear in milling INCONEL 718

被引：6
|
作者：
Kamdani, K. [1 ]
Ashaary, I [1 ]
Hassan, S. [1 ]
Lajis, M. A.
机构：
[1] Univ Tun Hussein Onn Malaysia, Precis Machining Res Ctr PREMACH, Fac Mech & Mfg Engn, Batu Pahat 86400, Johor, Malaysia
来源：
INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME2018) | 2019年 / 1150卷
关键词：
NICKEL-BASED SUPERALLOY; SURFACE INTEGRITY; LIFE;
D O I：
10.1088/1742-6596/1150/1/012046
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel 718 is known for being a difficult to cut material, this is due to its high strength at high temperatures, low thermal conductivity and high work hardening. These excellent properties makes Inconel 718 suitable for high temperature applications. This paper presents a study on the effects of the radial depth of cut on the cutting force variations and tool wear propagation in the first cut using TiAlN coated inserts as the cutting tool. The machining operation conducted was side milling at cutting speeds of 80m/min, 100m/min and 120 m/min. The results obtained shows that the cutting forces and tool wear increase with increasing radial depth of cut.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Temperature variation in the workpiece and in the cutting tool when dry milling inconel 718
    Dudzinski, D., 1600, Springer London (74):
  • [42] Tool wear area estimation through in-process edge force coefficient in trochoidal milling of Inconel 718
    Shah, Aash M.
    Agarwal, Ankit
    Mears, Laine
    MANUFACTURING LETTERS, 2023, 35 : 391 - 398
  • [43] Effects of tool wear on machined surface integrity during milling of Inconel 718
    Liang Tan
    Changfeng Yao
    Dinghua Zhang
    Minchao Cui
    Xuehong Shen
    The International Journal of Advanced Manufacturing Technology, 2021, 116 : 2497 - 2509
  • [44] Tool wear mechanism of micro-milling Inconel 718 thin wall
    Lu X.
    Luan Y.
    Yang K.
    Ruan F.
    Hou P.
    Zhao N.
    Lu, Xiaohong (lxhdlut@dlut.edu.cn), 1600, Inderscience Publishers (17): : 77 - 91
  • [45] Effects of tool wear on machined surface integrity during milling of Inconel 718
    Tan, Liang
    Yao, Changfeng
    Zhang, Dinghua
    Cui, Minchao
    Shen, Xuehong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 116 (7-8): : 2497 - 2509
  • [46] Influence of nanoparticle concentration in nanofluid MQL on cutting forces, tool wear, chip morphology when milling of Inconel 718
    Abdelkrem Eltaggaz
    Shafahat Ali
    Kashish Badwal
    Ibrahim Deiab
    The International Journal of Advanced Manufacturing Technology, 2023, 129 (3-4) : 1787 - 1800
  • [47] Machinability of inconel 718 during turning: Cutting force model considering tool wear, influence on surface integrity
    Toubhans, Bastien
    Fromentin, Guillaume
    Viprey, Fabien
    Karaouni, Habib
    Dorlin, Theo
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 285 (285)
  • [48] Influence of nanoparticle concentration in nanofluid MQL on cutting forces, tool wear, chip morphology when milling of Inconel 718
    Eltaggaz, Abdelkrem
    Ali, Shafahat
    Badwal, Kashish
    Deiab, Ibrahim
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 129 (3-4): : 1787 - 1800
  • [49] Development of an analytical model to investigate the effect of tool geometry and cutting parameters on the milling performance of Inconel 718
    Tang, Haiquan
    Li, Binglin
    Qi, Wen
    Zhang, Yi
    Wu, Xingsheng
    TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2024, 48 (04) : 671 - 683
  • [50] EVALUATION OF TOOL LIFE - TOOL WEAR IN MILLING OF INCONEL 718 SUPERALLOY AND THE INVESTIGATION OF EFFECTS OF CUTTING PARAMETERS ON SURFACE ROUGHNESS WITH TAGUCHI METHOD
    Motorcu, Ali Riza
    Kus, Abdil
    Arslan, Ridvan
    Tekin, Yucel
    Ezentas, Ridvan
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2013, 20 (05): : 765 - 774
12345