Modular Lead-Bismuth Fast Reactors in Nuclear Power

被引:21
|
作者
Toshinsky, Georgy [1 ,2 ]
Petrochenko, Vladimir [2 ]
机构
[1] SSC IPPE, Obninsk 249033, Kaluga Rg, Russia
[2] JSC AKME Engn, Moscow 115035, Russia
来源
SUSTAINABILITY | 2012年 / 4卷 / 09期
关键词
lead bismuth; fast reactor; reactor safety; SVBR-100; potential energy; nuclear fuel cycle; uranium oxide;
D O I
10.3390/su4092293
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
On the basis of the unique experience of operating reactors with heavy liquid metal coolant-eutectic lead-bismuth alloy in nuclear submarines, the concept of modular small fast reactors SVBR-100 for civilian nuclear power has been developed and validated. The features of this innovative technology are as follows: a monoblock (integral) design of the reactor with fast neutron spectrum, which can operate using different types of fuel in various fuel cycles including MOX fuel in a self-providing mode. The reactor is distinct in that it has a high level of self-protection and passive safety, it is factory manufactured and the assembled reactor can be transported by railway. Multipurpose application of the reactor is presumed, primarily, it can be used for regional power to produce electricity, heat and for water desalination. The Project is being realized within the framework of state-private partnership with joint venture OJSC "AKME-Engineering" established on a parity basis by the State Atomic Energy Corporation "Rosatom" and the Limited Liability Company "EuroSibEnergo".
引用
收藏
页码:2293 / 2316
页数:24
相关论文
共 50 条
  • [31] Thermal conductivity of liquid lead-bismuth alloys, possible coolants for fourth generation spallation nuclear reactors
    Sar, Frederic
    Mhiaoui, Souad
    Gasser, Jean-Georges
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2007, 353 (32-40) : 3622 - 3627
  • [32] Remote Thermoelastic Characterization of Candidate Structural and Protective Coatings for Lead-Bismuth Eutectic Cooled Nuclear Reactors
    Verstraeten, Bert
    Sermeus, Jan
    Van der Donck, Tom
    Schuurmans, Paul
    Glorieux, Christ
    APPLIED SCIENCES-BASEL, 2019, 9 (05):
  • [33] Flow and heat transfer evaluation of lead-bismuth eutectic coolant for nuclear power application
    Wang, Chen
    Wang, Chenglong
    Zhang, Yan
    Zhang, Dalin
    Tian, Wenxi
    Su, Guanghui
    Qiu, Suizheng
    NUCLEAR ENGINEERING AND DESIGN, 2021, 385
  • [34] Modelling and analysis of extra vessel electro magnetic pump for a small modular lead-bismuth fast reactor
    Kwak, Jaesik
    Kim, Hee Reyoung
    ANNALS OF NUCLEAR ENERGY, 2021, 152
  • [35] Leveraging Neutronics to Monitor Mass Transfer Corrosion in Lead and Lead-Bismuth Cooled Reactors
    Talaat, Khaled
    Anderoglu, Osman
    JOM, 2021, 73 (12) : 4051 - 4061
  • [36] Leveraging Neutronics to Monitor Mass Transfer Corrosion in Lead and Lead-Bismuth Cooled Reactors
    Khaled Talaat
    Osman Anderoglu
    JOM, 2021, 73 : 4051 - 4061
  • [37] LEAD-BISMUTH RADIOGRAPHY
    WOOLUM, DS
    BURNETT, DS
    AUGUST, LS
    NUCLEAR INSTRUMENTS & METHODS, 1976, 138 (04): : 655 - 662
  • [38] Study and optimization design of steam turbine generator suitable for small-scale lead-bismuth fast reactors
    Cheng, Peng
    Zhang, Hongen
    Guo, Wenfei
    Wang, Zhao
    IET GENERATION TRANSMISSION & DISTRIBUTION, 2025, 19 (01)
  • [39] Diffusional stability of ferritic-martensitic steel composite for service in advanced lead-bismuth cooled nuclear reactors
    Short M.P.
    Morton S.
    Ferry S.E.
    Ballinger R.G.
    International Heat Treatment and Surface Engineering, 2010, 4 (02) : 74 - 80
  • [40] Research on core power maximization method of natural circulation lead-bismuth cooled fast reactor
    Xiao, Yingjie
    Yang, Junkang
    Zhao, Pengcheng
    Yu, Tao
    Liu, Zijing
    FRONTIERS IN ENERGY RESEARCH, 2022, 10