High Temperature Properties of Magnesium Based Composites Prepared by Spark Plasma Sintering

被引：0
|
作者：
Muhammad, Wan Nur Azrina Binti Wan [1 ]
Mutoh, Yoshiharu [2 ]
Miyashita, Yukio [2 ]
机构：
[1] UTHM Parit Raja, Fac Mech Engn & Mfg, Dept Mat Engn & Design, Batu Pahat 86400, Johor, Malaysia
[2] Nagaoka Univ Technol, Dept Syst Safety, Nagaoka, Niigata 9402188, Japan
来源：
MECHANICAL ENGINEERING AND MATERIALS, PTS 1-3 | 2012年 / 152-154卷
关键词：
Composite material; magnesium; high temperature properties; powder metallurgy; sparks plasma sintering; TENSILE PROPERTIES; ALLOY; CAST;
D O I：
10.4028/www.scientific.net/AMM.152-154.638
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
High temperature tensile test was conducted to study high temperature properties of the magnesium based composites reinforced with SIC particulates and monolithic magnesium as well. It was found that tensile strength of monolithic magnesium and Mg-SiC composites decreased with an increase in testing temperature. While the elongation to failure both samples were increased when increasing temperature. At all testing temperature, the tensile strength of the composite sample was found to be superior compared to monolithic magnesium due to presence of SiC particulates and efficiency of spark plasma sintering process in fabrication of the composites.
引用
收藏
页码：638 / +
页数：3
相关论文
共 50 条
  • [31] Effect of Spark Plasma Sintering Temperature on the Microstructure and Thermophysical Properties of High-Silicon-Aluminum Composites
    Kong, Zhaoyang
    Wang, Zhipeng
    Li, Yingmin
    Li, Runxia
    COATINGS, 2024, 14 (03)
  • [32] Properties of NdFeB magnets prepared by spark plasma sintering
    Zhang, JX
    Yue, M
    Wang, GP
    Peng, B
    Gan, SW
    RARE EARTH MAGNETS AND THEIR APPLICATIONS, 2002, : 345 - 353
  • [33] High entropy alloys prepared by spark plasma sintering: Mechanical and thermal properties
    Ujah, Chika Oliver
    Von Kallon, Daramy Vandi
    Aigbodion, Victor Sunday
    MATERIALS TODAY SUSTAINABILITY, 2024, 25
  • [34] Thermoelectric properties of GeTe-based composites prepared by spark plasma sintering containing Bi/Sb additive
    Zhu, Can
    Wang, Jian
    Cheng, Lin
    Zhai, Lijun
    He, Junsong
    Zhang, Yan
    Liu, Hongxia
    Sun, Zhigang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
  • [35] AE42 magnesium alloy prepared by spark plasma sintering
    Minarik, Peter
    Strasky, Josef
    Vesely, Jozef
    Lukac, Frantisek
    Hadzima, Branislav
    Kral, Robert
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 742 : 172 - 179
  • [36] Hydrogen storage performance of Mg-based composites prepared by spark plasma sintering
    Liu, J.
    Song, X. P.
    Pei, P.
    Chen, G. L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 486 (1-2) : 338 - 342
  • [37] Effects of sintering temperature on the mechanical properties of sintered NdFeB permanent magnets prepared by spark plasma sintering
    Wang, G. P.
    Liu, W. Q.
    Huang, Y. L.
    Ma, S. C.
    Zhong, Z. C.
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2014, 349 : 1 - 4
  • [38] High temperature thermal physical performance of BeO/UO2 composites prepared by spark plasma sintering (SPS)
    Li, Bingqing
    Yang, Zhenliang
    Jia, Jianping
    Zhong, Yi
    Liu, Xuxu
    Zhang, Pengcheng
    Gao, Rui
    Liu, Tong
    Li, Rui
    Huang, Huawei
    Sun, Maozhou
    Mazhao, Dandan
    SCRIPTA MATERIALIA, 2018, 142 : 70 - 73
  • [39] Mechanical Properties and Corrosion Resistance of Magnesium-Hydroxyapatite Composites Fabricated by Spark Plasma Sintering
    Nakahata, Ikuho
    Tsutsumi, Yusuke
    Kobayashi, Equo
    METALS, 2020, 10 (10) : 1 - 13
  • [40] Dielectric properties of boron nitride-aluminium nitride composites prepared by spark plasma sintering
    Chen, Bin
    Pan, Wei
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 796 - +
12345