EXPERIMENTAL STUDY OF THE TRIBOLOGICAL BEHAVIOR OF A PIN - DISC TYPE OF CONTACT

被引：0
|
作者：
Djebali, Said [1 ]
Larbi, Said [1 ]
Bilek, Ali [2 ]
机构：
[1] M Mammeri Univ Tizi Ouzou, LMSE, Tizi Ouzou, Algeria
[2] M Mammeri Univ Tizi Ouzou, FGC, Dept Mech Engn, Tizi Ouzou, Algeria
来源：
IRF2016: 5TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE | 2016年
关键词：
Friction coefficient; mass loss; wears rate; steel; bronze; polyester; graphite; COMPOSITES;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The present work is a contribution to the study of the complex phenomenon of wear in a contact pin-disc in dry sliding friction of two material couples (bronze - steel and unsaturated polyester virgin and charged with powder of graphite - steel). It consists of the determination of the friction coefficient, the study of the influence of the tribological parameters on this coefficient and the determination of the mass loss and the wear rate of the pin. This study is also widened to the highlighting of the influence of the graphite powder addition on the tribological properties of the polymer constituting the pin.
引用
收藏
页码：337 / 338
页数：2
相关论文
共 50 条
  • [21] Tribological Behavior of UHMWPE (Disc) against Ti6Al4V (Pin) under Different Lubrication Conditions
    Visco, Annamaria
    Grasso, Antonio
    Scolaro, Cristina
    Belhamdi, Hossem
    Sili, Andrea
    MACROMOLECULAR SYMPOSIA, 2022, 404 (01)
  • [22] Experimental study on contact behavior of a bald tyre
    Wang, J.
    Liu, X.
    Zhang, T.
    Zhuang, J.
    Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2001, 32 (02): : 18 - 20
  • [23] Experimental Study of Tribological Behavior of Casted Aluminium-Bronze
    Sharma, Vipin K.
    Singh, R. C.
    Chaudhary, Rajiv
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (14) : 28008 - 28017
  • [24] Effect of Temperature and Humidity on Tribological Properties of Rail and Wheel Using Pin-On-Disc
    Yadav, Ajeet
    Sachin
    Dubey, Vineet
    Singh, Rabesh Kumar
    Sharma, Anuj Kumar
    RECENT ADVANCES IN SMART MANUFACTURING AND MATERIALS, ICEM 2020, 2021, : 237 - 244
  • [25] Tribological characteristics of ABS structures with different infill densities tested by pin-on-disc
    Akincioglu, Guelsah
    Sirin, Emine
    Aslan, Enes
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2023, 237 (05) : 1224 - 1234
  • [26] Influence of micro textures on the tribological contact and tribological behavior on the example of a CVT
    Drechsler, Sandra
    Albers, Albert
    Merkel, Philipp
    PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE, IJTC 2012, 2013, : 247 - 249
  • [27] Effect of cast-iron disc thickness on the reliability of tribological data from pin-on-disc test: Case study of brake friction materials
    Sellami, Amira
    Elleuch, Riadh
    HELIYON, 2024, 10 (03)
  • [28] Experimental Study on Contact Behavior of Tilted Contact in Air Circuit Breaker
    Li, Xingwen
    Wang, Yunfeng
    Wang, Qian
    Qu, Jianyu
    Liu, Hongwu
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2018, 8 (03): : 343 - 349
  • [29] Experimental Study on the Tribological Properties of Pure Powder Lubrication under Plane Contact
    Wang Wei
    Liu Xiaojun
    Liu Kun
    Li Hongxian
    ADVANCED TRIBOLOGY, 2009, : 151 - 152
  • [30] Multiparametric experimental analysis of the pin disc rotational cavitation generator
    Gostisa, Jurij
    Sirok, Brane
    Bizjan, Benjamin
    Ortar, Jernej
    Zupanc, Mojca
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2023, 38
12345