Experimental Investigations for Start Up and Maximum Heat Load of Closed Loop Pulsating Heat Pipe

被引：30
|
作者：
Sarangi, R. K. [1 ]
Rane, M. V. [2 ]
机构：
[1] Don Bosco Inst Technol, Mech Engn Dept, Bombay 400070, Maharashtra, India
[2] Indian Instute Technol Bombay, Mech Engn Dept, Bombay 400076, Maharashtra, India
来源：
CHEMICAL, CIVIL AND MECHANICAL ENGINEERING TRACKS OF 3RD NIRMA UNIVERSITY INTERNATIONAL CONFERENCE ON ENGINEERING (NUICONE2012) | 2013年 / 51卷
关键词：
Pulsating Heat Pipe; Optimum Fill Ratio; Start up Heat Load; Maximum Heat Load;
D O I：
10.1016/j.proeng.2013.01.097
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Startup heat load, maximum heat load and optimum fill ratio of Pulsating Heat Pipe (PHP) of 16 turn, 1 mm ID, 2 mm OD and 9.6 m total length are found out experimentally for water and ethanol as working fluids. PHP is operated in vertical bottom heat mode. Evaporator and condenser temperatures are maintained at 100 degrees C and 28 degrees C respectively. Temperature fluctuations of adiabatic section at startup and maximum heat loads are reported. Experimental results indicate that, startup heat load is independent of fill ratio, but maximum heat load depends on fill ratio. Optimum fill ratio for maximum heat load depends on working fluid for a given PHP and operating temperatures. (C) 2013 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：683 / 687
页数：5
相关论文
共 50 条
  • [21] Thermo-hydrodynamics of closed loop pulsating heat pipe: an experimental study
    Pachghare, Pramod R.
    Mahalle, Ashish M.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2014, 28 (08) : 3387 - 3394
  • [22] Experimental investigations of heat transfer mechanisms of a pulsating heat pipe
    Jo, Jaeyeong
    Kim, Jungho
    Kim, Sung Jin
    ENERGY CONVERSION AND MANAGEMENT, 2019, 181 : 331 - 341
  • [23] Thermo-hydrodynamics of closed loop pulsating heat pipe: an experimental study
    Pramod R. Pachghare
    Ashish M. Mahalle
    Journal of Mechanical Science and Technology, 2014, 28 : 3387 - 3394
  • [24] Experimental Investigations on the Thermal Performance of a Vertical Closed Loop Pulsating Heat Pipe Using Binary Mixture of Fluids
    Pradeep, G. V.
    Narasimha, K. Rama
    INTERNATIONAL JOURNAL OF ENGINEERING, 2018, 31 (05): : 805 - 811
  • [25] Experimental study on the start up performance of flat plate pulsating heat pipe
    Chaofa Hu
    Li Jia
    Journal of Thermal Science, 2011, 20 : 150 - 154
  • [26] Experimental Study on the Start Up Performance of Flat Plate Pulsating Heat Pipe
    Chaofa Hu and Li Jia School of Mechanical
    JournalofThermalScience, 2011, 20 (02) : 150 - 154
  • [27] Experimental Study on the Start Up Performance of Flat Plate Pulsating Heat Pipe
    Hu, Chaofa
    Jia, Li
    JOURNAL OF THERMAL SCIENCE, 2011, 20 (02) : 150 - 154
  • [28] Visualization experiment on the start-up performance of the close loop pulsating heat pipe
    Wang, Xun
    Yang, Chengsi
    Mao, Xinxin
    Han, Tong
    ADVANCES IN CHEMICAL ENGINEERING II, PTS 1-4, 2012, 550-553 : 3150 - 3154
  • [29] Experiment study on Visualization and start-up performance of closed loop plate pulsating heat pipe with parallel channels
    Shi, Weixiu
    Li, Weiyi
    Pan, Lisheng
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2014, 50 (04): : 155 - 161
  • [30] Modeling for Fluid Flow and Heat Transfer in Closed Loop Pulsating Heat Pipe
    Sarangi, R. K.
    Kar, S. P.
    Rane, M., V
    Swain, A.
    Pothal, L. K.
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2021, 13 (04)
12345