Structure and Properties of Hot-Rolled Strips Obtained from Titanium Chips without Chip Remelting

被引：3
|
作者：
Mal'kov, A. V. [1 ]
Shevchenko, V. V. [1 ]
Nizkin, I. D. [1 ]
Luk'yanova, E. V. [1 ]
机构：
[1] Tsiolkovsky Russian State Technol Univ RGTU MATI, Stupino Branch, Stupino 142800, Moscow Oblast, Russia
来源：
RUSSIAN JOURNAL OF NON-FERROUS METALS | 2008年 / 49卷 / 04期
关键词：
Titanium Alloy; Hydrogen Content; Briquette; Vacuum Annealing; Thin Strip;
D O I：
10.3103/S1067821208040081
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Introduction of hydrogen technology provided hot-rolling fabrication of thin strips from chips of VT1-0 titanium alloy without chip remelting. It is established that the plasticity of strips made from this alloy largely depends on the presence of excess dispersed particles in the structure. It is assumed that they are the sparingly soluble oxides formed during the destruction in the course of pressure treatment of the oxide film retained on the chip surface. After homogenization, which can be combined with vacuum annealing for hydrogen removal, the structure and mechanical properties of the strips obtained by hydrogen technology correspond to the characteristics of semifinished products fabricated by ingot technology.
引用
收藏
页码：258 / 260
页数：3
相关论文
共 50 条
  • [31] Origin of fine ferrite grain structure of sheet steel hot-rolled in ferrite region without lubrication
    Matsuoka, S
    Sakata, K
    Furukimi, O
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1999, 85 (06): : 471 - 478
  • [32] Tribological properties of magnetite precipitate from oxide scale in hot-rolled microalloyed steel
    Yu, Xianglong
    Jiang, Zhengyi
    Wei, Dongbin
    Zhou, Cunlong
    Huang, Qingxue
    Yang, Daijun
    WEAR, 2013, 302 (1-2) : 1286 - 1294
  • [33] Effect of Solution and Aging Treatment on Microstructure and Properties of TC4 Titanium Alloy Hot-Rolled Sheet by Sponge Titanium/Electrolytic Titanium Melting
    Tan Cong
    Xiao Han
    Zhang Hongyu
    Huang Haiguang
    Yu Kun
    Zhou Rongfeng
    Li Zhimin
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (12) : 4290 - 4296
  • [34] System for prediction of the structure and mechanical properties of parts hot-rolled in continuous broad-strip mills
    Frantsenyuk, LI
    Bogomolov, IV
    METAL SCIENCE AND HEAT TREATMENT, 2002, 44 (1-2) : 90 - 90
  • [35] STRUCTURE AND MECHANICAL-PROPERTIES OF HOT-ROLLED SHEET ALONG ITS LENGTH WITH DIFFERENT VARIANTS OF COOLING
    PIMENOV, AF
    SHAPOVALOV, AP
    ANDREEV, NE
    LOMMA, VK
    MUSTAFAEV, IA
    GRUZNOV, AK
    CHASHCHIN, VV
    METALLURGIST, 1980, 24 (9-10) : 358 - 360
  • [36] INFLUENCE OF VACUUM ANNEALING ON THE STRUCTURE, TEXTURE, AND PROPERTIES OF HOT-ROLLED PT-3V ALLOY
    TARASOV, AF
    PRUDKOVA, RA
    KOPYLOVA, NE
    METAL SCIENCE AND HEAT TREATMENT, 1990, 32 (1-2) : 50 - 52
  • [37] System for Prediction of the Structure and Mechanical Properties of Parts Hot-Rolled in Continuous Broad-Strip Mills
    L. I. Frantsenyuk
    I. V. Bogomolov
    Metal Science and Heat Treatment, 2002, 44 : 91 - 91
  • [38] CHARACTERISTICS OF THE TRANSFORMATION OF AUSTENITE IN HOT-ROLLED STRIPS FROM CONTINUOUSLY CAST SLABS OF STEEL 17G2SF
    TARAN, YN
    YATSENKO, AI
    REPINA, NI
    SIMONENKO, OA
    METAL SCIENCE AND HEAT TREATMENT, 1979, 21 (3-4) : 236 - 237
  • [39] Effects of Dynamical Deformation Ageing on Structure and Texture of Hot-Rolled Sheets from Alloyed BCC Metals
    Yu. Perlovich
    M. Isaenkova
    International Journal of Material Forming, 2010, 3 : 1143 - 1146
  • [40] EFFECTS OF DYNAMICAL DEFORMATION AGEING ON STRUCTURE AND TEXTURE OF HOT-ROLLED SHEETS FROM ALLOYED BCC METALS
    Perlovich, Yu.
    Isaenkova, M.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 1143 - 1146
12345