Structure and Properties of Hot-Rolled Strips Obtained from Titanium Chips without Chip Remelting

被引：3
|
作者：
Mal'kov, A. V. [1 ]
Shevchenko, V. V. [1 ]
Nizkin, I. D. [1 ]
Luk'yanova, E. V. [1 ]
机构：
[1] Tsiolkovsky Russian State Technol Univ RGTU MATI, Stupino Branch, Stupino 142800, Moscow Oblast, Russia
来源：
RUSSIAN JOURNAL OF NON-FERROUS METALS | 2008年 / 49卷 / 04期
关键词：
Titanium Alloy; Hydrogen Content; Briquette; Vacuum Annealing; Thin Strip;
D O I：
10.3103/S1067821208040081
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Introduction of hydrogen technology provided hot-rolling fabrication of thin strips from chips of VT1-0 titanium alloy without chip remelting. It is established that the plasticity of strips made from this alloy largely depends on the presence of excess dispersed particles in the structure. It is assumed that they are the sparingly soluble oxides formed during the destruction in the course of pressure treatment of the oxide film retained on the chip surface. After homogenization, which can be combined with vacuum annealing for hydrogen removal, the structure and mechanical properties of the strips obtained by hydrogen technology correspond to the characteristics of semifinished products fabricated by ingot technology.
引用
收藏
页码：258 / 260
页数：3
相关论文
共 50 条
  • [1] Structure and properties of hot-rolled strips obtained from titanium chips without chip remelting
    A. V. Mal’kov
    V. V. Shevchenko
    I. D. Nizkin
    E. V. Luk’yanova
    Russian Journal of Non-Ferrous Metals, 2008, 49 : 258 - 260
  • [2] Characterization and properties of oxide scales on hot-rolled strips
    Zhang, Mengyi
    Shao, Guangjie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 452 : 189 - 193
  • [3] Effect of the Rate of Continuous Rolling on the Structure and Properties of Hot-Rolled Steel Strips.
    Zheleznov, Yu.D.
    Frantsenyuk, I.V.
    Mukhin, Yu.A.
    Kotsar', S.L.
    Chvilev, V.V.
    Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya, 1976, (04): : 107 - 110
  • [4] EFFECT OF PRIMARY MICROSTRUCTURE ON THE FINAL PROPERTIES OF HOT-ROLLED SHEETS AND STRIPS
    FUNKE, P
    ELSAYED, M
    STAHL UND EISEN, 1988, 108 (22): : 1083 - 1091
  • [5] Prediction model for mechanical properties of hot-rolled strips by deep learning
    Li, Wei-gang
    Xie, Lu
    Zhao, Yun-tao
    Li, Zi-xiang
    Wang, Wen-bo
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2020, 27 (09) : 1045 - 1053
  • [6] Prediction model for mechanical properties of hot-rolled strips by deep learning
    Wei-gang Li
    Lu Xie
    Yun-tao Zhao
    Zi-xiang Li
    Wen-bo Wang
    Journal of Iron and Steel Research International, 2020, 27 : 1045 - 1053
  • [7] Correlation of Microstructure and Fatigue Properties of Hot-Rolled Steel Strips for Automobile Structural Application
    Zhang, Dawei
    Du, Linxiu
    Lan, Liangyun
    Gao, Cairu
    Xiao, Baoliang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (06) : 4009 - 4017
  • [8] Correlation of Microstructure and Fatigue Properties of Hot-Rolled Steel Strips for Automobile Structural Application
    Dawei Zhang
    Linxiu Du
    Liangyun Lan
    Cairu Gao
    Baoliang Xiao
    Journal of Materials Engineering and Performance, 2020, 29 : 4009 - 4017
  • [9] Quality prediction model of the mechanical properties of hot-rolled steel strips and its application
    Information Engineering School, University of Science and Technology Beijing, Beijing 100083, China
    不详
    Beijing Keji Daxue Xuebao, 2006, 7 (687-690):
  • [10] EFFECT OF COLD REDUCTION ON STRUCTURE AND MECHANICAL PROPERTIES OF HOT-ROLLED STRIP
    POLUKHIN, VP
    POTEMKIN, VK
    STEEL IN THE USSR, 1971, 1 (08): : 644 - &
12345