A heat transfer and friction factor correlation for low air-side Reynolds number applications of compact heat exchangers (1535-RP)

被引:12
|
作者
Shinde, Pradeep [1 ]
Lin, Cheng-Xian [1 ]
机构
[1] Florida Int Univ, Dept Mech & Mat Engn, 10555 W Flagler St, Miami, FL 33174 USA
关键词
LOUVER FIN GEOMETRY; PRESSURE-DROP CORRELATIONS; PERFORMANCE;
D O I
10.1080/23744731.2016.1203240
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this article, an experimental investigation of the heat transfer and pressure drop of compact heat exchangers with louvered fins and flat tubes was conducted within a low air-side Reynolds number range of 20< Re-Lp < 200. Using an existing low-speed wind tunnel, 26 sample heat exchangers of corrugated louver fin type, were tested. New correlations for Colburn factor j and Fanning friction factor f have been developed using eight nondimensional parameters based on the experimental data. Within the investigated parameter ranges, it seems that both the j and f factors are better represented by two correlations in two flow regimes (one for Re-Lp = 20 - 80 and one for Re-Lp = 80 - 200) than single regime correlation in the format of power-law. The results support the conclusion that airflow and heat transfer at very low Reynolds numbers behaves differently from that at higher Reynolds numbers.
引用
收藏
页码:192 / 210
页数:19
相关论文
共 50 条
  • [31] Enhancement of air-side heat transfer in crossflow heat exchangers with maldistributed flows using auto-fluttering reeds
    Crystal, Roland, V
    Garimella, Srinivas
    APPLIED THERMAL ENGINEERING, 2025, 265
  • [32] Air-side heat transfer and pressure drop characteristics of multi-louver fin and flat tube heat exchangers
    Kim, Man-Hoe
    Bullard, Clark W.
    American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, 2000, 40 : 191 - 195
  • [33] Air-side data interpretation and performance analysis for heat exchangers with simultaneous heat and mass transfer: Wet and frosted surfaces
    Xia, YP
    Jacobi, AM
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (25-26) : 5089 - 5102
  • [34] Experimental quantification of air-side row-by-row heat transfer coefficients on fin-and-tube heat exchangers
    Che, Min
    Elbel, Stefan
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2021, 131 : 657 - 665
  • [35] Experimental investigation of thermal hydraulic performance of heat exchangers with different Reynolds numbers on both air-side and water-side
    Zhang, Xilong
    Wang, Yichun
    Cang, Peng
    Wang, Rui
    APPLIED THERMAL ENGINEERING, 2016, 99 : 1331 - 1339
  • [36] A convection heat transfer correlation for a binary air-helium mixture at low reynolds number
    Banerjee, Arindam
    Andrews, Malcolm J.
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2007, 129 (11): : 1494 - 1505
  • [37] CFD Analysis on the Air-Side Thermal-Hydraulic Performance of Multi-Louvered Fin Heat Exchangers at Low Reynolds Numbers
    Saleem, Arslan
    Kim, Man-Hoe
    ENERGIES, 2017, 10 (06)
  • [38] Air inlet angle influence on the air-side heat transfer and flow friction characteristics of a finned oval tube heat exchanger
    Tang, Linghong
    Du, Xueping
    Pan, Jie
    Sunden, Bengt
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 145
  • [39] Air-side Heat Transfer and Pressure Drop Characteristics of Louver-finned Aluminum Heat Exchangers at Different Inclination Angles
    Kim, Nae-Hyun
    Kim, Do-Young
    Choi, Yong-Min
    Byun, Ho-Won
    JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, 2009, 4 (03): : 350 - 361
  • [40] Air-Side Heat Transfer Performance Prediction for Microchannel Heat Exchangers Using Data-Driven Models with Dimensionless Numbers
    Huang, Long
    Zou, Junjia
    Liu, Baoqing
    Jin, Zhijiang
    Qian, Jinyuan
    FRONTIERS IN HEAT AND MASS TRANSFER, 2024, 22 (06): : 1613 - 1643