A heat transfer and friction factor correlation for low air-side Reynolds number applications of compact heat exchangers (1535-RP)

被引:12
|
作者
Shinde, Pradeep [1 ]
Lin, Cheng-Xian [1 ]
机构
[1] Florida Int Univ, Dept Mech & Mat Engn, 10555 W Flagler St, Miami, FL 33174 USA
关键词
LOUVER FIN GEOMETRY; PRESSURE-DROP CORRELATIONS; PERFORMANCE;
D O I
10.1080/23744731.2016.1203240
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this article, an experimental investigation of the heat transfer and pressure drop of compact heat exchangers with louvered fins and flat tubes was conducted within a low air-side Reynolds number range of 20< Re-Lp < 200. Using an existing low-speed wind tunnel, 26 sample heat exchangers of corrugated louver fin type, were tested. New correlations for Colburn factor j and Fanning friction factor f have been developed using eight nondimensional parameters based on the experimental data. Within the investigated parameter ranges, it seems that both the j and f factors are better represented by two correlations in two flow regimes (one for Re-Lp = 20 - 80 and one for Re-Lp = 80 - 200) than single regime correlation in the format of power-law. The results support the conclusion that airflow and heat transfer at very low Reynolds numbers behaves differently from that at higher Reynolds numbers.
引用
收藏
页码:192 / 210
页数:19
相关论文
共 50 条
  • [1] Generalized air-side friction and heat transfer correlations for wavy-fin compact heat exchangers
    Qasem, Naef A. A.
    Zubair, Syed M.
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2019, 97 : 21 - 30
  • [2] Computational insights into air-side flow and heat transfer in compact heat exchangers
    Tafti, D. K.
    HT2005: Proceedings of the ASME Summer Heat Transfer Conference 2005, Vol 2, 2005, : 847 - 857
  • [3] Air-side flow and heat transfer in compact heat exchangers: A discussion of enhancement mechanisms
    Jacobi, AM
    Shah, RK
    HEAT TRANSFER ENGINEERING, 1998, 19 (04) : 29 - 41
  • [4] A Comparison of Metal-Foam Heat Exchangers to Compact Multilouver Designs for Air-Side Heat Transfer Applications
    Dai, Z.
    Nawaz, K.
    Park, Y.
    Chen, Q.
    Jacobi, A. M.
    HEAT TRANSFER ENGINEERING, 2012, 33 (01) : 21 - 30
  • [5] Compact and microchannel heat exchangers: A comprehensive review of air side friction factor and heat transfer correlations
    Qasem, Naef A. A.
    Zubair, Syed M.
    ENERGY CONVERSION AND MANAGEMENT, 2018, 173 : 555 - 601
  • [6] Air-Side Heat Transfer and Friction Correlations for Flat-Tube Louver-Fin Heat Exchangers
    Park, Young-Gil
    Jacobi, Anthony M.
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2009, 131 (02): : 1 - 12
  • [7] A Correlation for the Air-Side Heat Transfer Coefficient Assessment in Continuous Flat-Plate Finned Heat Exchangers
    Tarrad, Ali Hussain
    Khudor, Damiaa Saad
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2015, 7 (02)
  • [8] Air-Side Nusselt Numbers and Friction Factor's Individual Correlations of Finned Heat Exchangers
    Marcinkowski, Mateusz
    Taler, Dawid
    Taler, Jan
    Weglarz, Katarzyna
    ENERGIES, 2022, 15 (15)
  • [9] AIR-SIDE HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF PERIPHERAL FIN HEAT EXCHANGERS
    Pussoli, Bruno F.
    Barbosa, Jader R., Jr.
    da Silva, Luciana W.
    Kaviany, Massoud
    PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 4: HEAT TRANSFER MEASUREMENT TECHNIQUES, HEAT TRANSFER EQUIPMENT, THERMOELECTRICS, 2010, : 703 - 712
  • [10] Air-side heat transfer and friction correlations for plain fin-and-tube heat exchangers with staggered tube arrangements
    Kim, N.H.
    Youn, B.
    Webb, R.L.
    Journal of Heat Transfer, 1999, 121 (03): : 662 - 667