Properties of recycled high-density polyethylene/water hyacinth fiber composites: the effect of different concentration of compatibilizer

被引:16
|
作者
Tan, S. J. [1 ,2 ]
Supri, A. G. [1 ]
Chong, K. M. [3 ]
机构
[1] Univ Malaysia Perlis, Fac Engn Technol, Kangar 01000, Perlis, Malaysia
[2] Univ Malaysia Perlis, Sch Mat Engn, Ctr Excellence Geopolymer & Green Technol, Kangar 01007, Perlis, Malaysia
[3] Univ Malaysia Perlis, Sch Mat Engn, Arau 02600, Perlis, Malaysia
关键词
Recycled high-density polyethylene; Compatibilizer; Water hyacinth fiber; MECHANICAL-PROPERTIES; G-MAH; BLENDS; POWDER;
D O I
10.1007/s00289-015-1387-3
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The effect of different concentrations of polyethylene-grafted-maleic anhydride (PE-g-MAH) in recycled high-density polyethylene/water hyacinth fiber (rHDPE/WHF) composites was studied. RHDPE/WHF composites with different concentrations of PE-g-MAH were prepared using Z-blade mixer at 180 A degrees C with the rotor speed of 50 rpm. The results indicated 6 wt% of PE-g-MAH showed the highest tensile strength and Young's modulus but lowest water absorption compared to other concentration of PE-g-MAH. The SEM morphology of 6 wt% of PE-g-MAH displayed better fiber dispersion and less fiber pull out than other concentration of PE-g-MAH. Moreover, FTIR analysis also showed the presence of ester carbonyl group and reduction of OH group in rHDPE/WHFPE-g-MAH composites than uncompatibilized composites.
引用
收藏
页码:2019 / 2031
页数:13
相关论文
共 50 条
  • [41] Dynamic and Static Properties of Wood-plastic Composites Made of Recycled High-Density Polyethylene
    Yu, Guiwen
    Hu, Yingcheng
    Gu, Jiyou
    ECO-MATERIALS PROCESSING AND DESIGN XI, 2010, 658 : 475 - 478
  • [42] Recycled high-density polyethylene/gypsum composites: evaluation of the microscopic, thermal, flammability, and mechanical properties
    Ramos, F. J. H. T. V.
    Mendes, L. C.
    GREEN CHEMISTRY LETTERS AND REVIEWS, 2014, 7 (02) : 199 - 208
  • [43] PROPERTIES OF RECYCLED HIGH-DENSITY POLYETHYLENE FROM MILK BOTTLES
    PATTANAKUL, C
    SELKE, S
    LAI, C
    MILTZ, J
    JOURNAL OF APPLIED POLYMER SCIENCE, 1991, 43 (11) : 2147 - 2150
  • [44] PROPERTIES OF HIGH-DENSITY POLYETHYLENE FROM POSTCONSUMER RECYCLED CONTAINERS
    BLATZ, PS
    ACS SYMPOSIUM SERIES, 1992, 513 : 258 - 265
  • [45] Fabrication and Characterization of High-density Polyethylene - Coconut Coir Composites with Stearic Acid as Compatibilizer
    Enriquez, Joseph King Eos Dawn V.
    Santiago, Peter June Macalino
    Ong, Timothy Funcion
    Chakraborty, Soma
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2010, 23 (03) : 361 - 373
  • [46] Influence of surface-treatment of bamboo fiber on the physico-mechanical properties of bamboo fiber composites with virgin and recycled high-density polyethylene
    Mohanta, Santoshi
    Mahalik, Priyanka
    Hota, Gayatri Prasad
    Sahoo, Bipin Bihari
    Pradhan, Subhransu Sekhar
    Mohanty, Shyama Prasad
    POLYMER COMPOSITES, 2024, 45 (01) : 914 - 923
  • [47] Curaua fiber reinforced high-density polyethylene composites: effect of impact modifier and fiber loading
    de Morais, Jaqueline Albano
    Gadioli, Renan
    De Paoli, Marco-Aurelio
    POLIMEROS-CIENCIA E TECNOLOGIA, 2016, 26 (02): : 115 - 122
  • [48] Effect of recycled polypropylene on polypropylene/high-density polyethylene blends
    Bonelli, CMC
    Martins, AF
    Mano, EB
    Beatty, CL
    JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 80 (08) : 1305 - 1311
  • [49] Properties of Recycled High Density Polyethylene and Coffee Dregs Composites
    Cestari, Sibele Piedade
    Mendes, Luis Claudio
    da Silva, Daniela Franca
    Chimanowsky, Jorge Pereira, Jr.
    Altstaedt, Volker
    Demchuk, Vitaly
    Lang, Anneliese
    Leonhardt, Rodrigo Gheno
    Keller, Jan-Hendrik
    POLIMEROS-CIENCIA E TECNOLOGIA, 2013, 23 (06): : 733 - 737
  • [50] Mechanical and Morphological Properties of Flax Fiber Reinforced High Density Polyethylene/Recycled Rubber Composites
    Kakroodi, A. R.
    Bainier, J.
    Rodrigue, D.
    INTERNATIONAL POLYMER PROCESSING, 2012, 27 (02) : 196 - 204