A Fuzzy-Based Taguchi Method for Multiobjective Design of PM Motors

被引：47
|
作者：
Hwang, Chang-Chou [1 ]
Chang, Chia-Ming [2 ]
Liu, Cheng-Tsung [3 ]
机构：
[1] Feng Chia Univ, Dept Elect Engn, Taichung 407, Taiwan
[2] Feng Chia Univ, Ph D Program Elect & Commun Engn, Taichung 407, Taiwan
[3] Natl Sun Yat Sen Univ, Dept Elect Engn, Kaohsiung 804, Taiwan
来源：
IEEE TRANSACTIONS ON MAGNETICS | 2013年 / 49卷 / 05期
关键词：
Efficiency; finite element method; fuzzy-based Taguchi method; multiobjective optimization; torque ripple; TORQUE RIPPLE; ROBUST DESIGN; OPTIMIZATION; REDUCTION;
D O I：
10.1109/TMAG.2013.2242854
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper describes a design optimization based on the fuzzy-based Taguchi method coupled with finite element analysis (FEA). The proposed approach takes advantage of both the Taguchi method and a fuzzy rule based inference system, which forms a robust and practical methodology in tackling multiobjective optimization problems. The proposed methodology is applied to the optimization design of a surface-mounted permanent magnet (SPM) motor. The experimental results confirm the validity of the proposed method.
引用
收藏
页码：2153 / 2156
页数：4
相关论文
共 50 条
  • [1] Robust Design of In-wheel PM Motor by Fuzzy-based Taguchi Method
    Gaing, Zwe-Lee
    Chiang, Jui-An
    IEEE POWER AND ENERGY SOCIETY GENERAL MEETING 2010, 2010,
  • [2] Application of Fuzzy-Based Hybrid Taguchi Method for Multiobjective Optimization of Product Form Design
    Li, Yongfeng
    Shieh, Meng-Dar
    Yang, Chih-Chieh
    Zh, Liping
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2018, 2018
  • [3] Application of the fuzzy-based Taguchi method for the structural design of drawing dies
    Bor-Tsuen Lin
    Chun-Chih Kuo
    The International Journal of Advanced Manufacturing Technology, 2011, 55 : 83 - 93
  • [4] Application of the fuzzy-based Taguchi method for the structural design of drawing dies
    Lin, Bor-Tsuen
    Kuo, Chun-Chih
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 55 (1-4): : 83 - 93
  • [5] Multiobjective Design Optimization of an IPMSM for EVs Based on Fuzzy Method and Sequential Taguchi Method
    Sun, Xiaodong
    Shi, Zhou
    Zhu, Jianguo
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2021, 68 (11) : 10592 - 10600
  • [6] Robust design of an ultra-thin centrifugal fan on fuzzy-based Taguchi method
    Hsien, Kuang-Hung
    Huang, Shyh-Chour
    ADVANCED DESIGNS AND RESEARCHES FOR MANUFACTURING, PTS 1-3, 2013, 605-607 : 189 - 192
  • [7] Application of the fuzzy-based Taguchi method for servo stamping curve
    Kuo-Wang Liu
    Chun-Chih Kuo
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 7325 - 7339
  • [8] Application of the fuzzy-based Taguchi method for servo stamping curve
    Liu, Kuo-Wang
    Kuo, Chun-Chih
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (11-12): : 7325 - 7339
  • [9] Multiobjective Design of a Line-Start PM Motor Using the Taguchi Method
    Sorgdrager, Albert Johan
    Wang, Rong-Jie
    Grobler, Andries J.
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2018, 54 (05) : 4167 - 4176
  • [10] Optimal Design of an IPM Motor Using Fuzzy-based Taguchi Method and Rosenbrack's Algorithm
    Hwang, Chang-Chou
    Liu, Cheng-Tsung
    Hong, Chong Jie
    2016 XXII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2016, : 1957 - 1962
12345